718772
79
Zoom out
Zoom in
Previous page
1/212
Next page
UTILITY STITCHES
Various Stitches
77
3
f
Press the “Start/Stop” button to stop sewing when you
are finished, and raise the presser foot and needle to
pull the fabric under the presser foot towards the back
of the machine.
Using Zigzag Foot “J”
a
Select a stitch.
b
Attach zigzag foot “J”.
c
Sew along the edge of the fabric with the needle
dropping off the edge at the right.
Quilting
You can make beautiful quilts quickly and easily with
this machine. When making a quilt, you will find it
convenient to use the knee lifter and foot controller to
free your hands for other tasks (“Using the Foot
Controller” on page 58 and /or “Using the Knee Lifter”
on page 66).
The 30 quilting stitches Q-01 through Q-30 and the
utility stitches with “P” or “Q” indicated on their key
are useful for quilting.
The “P” or “Q” at the bottom of the key display
indicates that these stitches are intended for (“Q”)
quilting and (“P”) piecing.
Piecing
Sewing two pieces of fabric together is called piecing.
When cutting pieces for quilt blocks, make sure the seam
allowance is 6.5 mm (approx. 1/4 inch).
a
Select a stitch and attach presser foot “J”.
b
Align the edge of the fabric with the edge of the presser
foot, and start sewing.
* To sew a 6.5 mm (approx. 1/4 inch) seam
allowance along the left edge of the presser foot
with
(Q-02) selected, the width (which is the
CAUTION
Be sure to pull the fabric backward after
finished sewing. If you pull the fabric toward
side or forward, the presser foot pin may be
damaged.
If thread is tangled on the presser foot, remove
the entangled thread, and then raise the
presser foot lever to remove the presser foot. If
the presser foot is raised while entangled with
thread, the presser foot may be damaged.
1 Needle drop point
Fine adjustment of the stitching on the fabric can
be done with “L/R Shift”. Before sewing your
project, be sure to sew trial stitches using the same
conditions as in the actual project.
a
When a stitch pattern in the Quilting Stitches
category (only quilting stitches marked with “Q”) is
selected, a finer stitch width can be set than that
available with stitch patterns in other categories.
For details on stitch patterns, refer to “STITCH
SETTING CHART” on page 194.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info