718772
82
Zoom out
Zoom in
Previous page
1/212
Next page
UTILITY STITCHES
80
Free Motion Quilting
With free motion quilting, the feed dogs can be lowered
by pressing , so that the fabric can be moved freely in
any direction.
For free motion quilting, use free motion quilting foot “C”
or free motion open toe quilting foot “O” depending on
the stitch that is selected, and set the machine to free
motion sewing mode. In this mode, the presser foot is
raised to the necessary height for free motion sewing.
We recommend attaching the foot controller and sewing
at a consistent speed. You can adjust the sewing speed
with the speed control slide on the machine.
Using free motion quilting foot “C” (Included with some
models)
Use the free motion quilting foot “C” with straight stitch
needle plate for free motion sewing.
Free motion quilting foot “C”
a
Attach the straight stitch needle plate (page 67).
b
Select a stitch.
c
Press to set the machine to free motion sewing
mode.
The key appears as , the quilting foot is raised to
the necessary height, and then the feed dogs are
lowered for free motion sewing.
1 Free motion quilting foot “C”
d
Remove the presser foot holder (page 50).
e
Attach free motion quilting foot “C” at the front with
the presser foot holder screw aligned with the notch in
the quilting foot.
f
Hold the quilting foot in place with your right hand,
and tighten the presser foot holder screw using the
disc-shaped screwdriver with your left hand.
With free motion quilting, control the feeding speed
of the fabric to match the sewing speed. If the
fabric is moved faster than the sewing speed, the
needle may break or other damage may result.
When starting to sew, the internal sensor detects
the thickness of the fabric, and the quilting foot is
raised to the height specified in the machine
settings screen. Press to display [Free
Motion Foot Height] of the settings screen. Press
or to select the height that the quilting foot
is raised above the fabric.
When stitch Q-01 or 1-31 is selected, free motion
quilting foot “C” is indicated in the upper-left
corner of the screen. When the other stitches are
selected, free motion open toe quilting foot “O” is
indicated in the screen.
CAUTION
When using free motion quilting foot “C”, be
sure to use the straight stitch needle plate. If the
needle is moved to any position other than the
middle (center) needle position, the needle may
break, which may result in injuries.
C
1 Round hole
1 Presser foot holder
screw
2 Notch
Make sure that the quilting foot is attached
properly and not slanted.
a
1
b
a
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info