Manual Brother BE-1204B-BC - PC control (page 243 of 262) (English)

644489

243

Zoom out

Zoom in

1/262

BE-1204B-BC • BE-1206B-BC 11-3

Chapter 11 Error code list

Code Error Measures

E-13

This is displayed in case that the machine had

been shut down while the hoop was moving

and now is started up in a mode without the

home position detection, or in case that the

machine is started up in a mode without the

home position detection after pressing the CAP

SW to change the hoop.

Press the

to start the home position moving.

E-14 Y-axis home position error

Turn the power off and on once. If the same error occurs

again, the Y-axis mechanism is faulty.

E-15

Stop error during SSP processing (when

pressing the stop key while the hoop is moving)

Hoop movement restarts if you press

E-16

Needle bar No. of the destination is out of

range

Press the

, or turn ON the F/B switch on the head to either

side to cancel the error and set up the needle bar setting again.

E-17 Speed range is out of range This is not usually displayed.

E-18 X-axis stepping motor connector error

Turn the power off and on once after checking to see that the

connector of the X-axis stepping motor is properly connected.

E-1A Destination coordinates error

E-1B

The machine has reached the mending stop

position.

This is not usually displayed.

E-1C The machine stops during mask tracing.

Tracing is cancelled if the

key is pressed when the

machine is stopped during mask tracing. Press the

key

to continue tracing.

E-1D

The machine stops while the needle is moving

between patterns during repeat sewing.

This is displayed when the stop switch is pressed while the

hoop is moving. Press the

to move the hoop again. (It

is necessary to press the

again to start sewing.)

Errors E-1C and E-1D are not displayed due to mechanical problems.

E-1E

When the power is turned on, bed can not be

retracted.

E-1F

Presser foot down error while searching for

home position just after the power is turned on.

This is not displayed in this model.

E-21 Hoop overhang (+X)

E-22 Hoop overhang (+Y)

E-23 Hoop overhang (+X, +Y)

E-24 Hoop overhang (-X)

E-25 Hoop overhang (+X, -X)

E-26 Hoop overhang (-X, +Y)

Pattern or the needle position is out of the embroidering area.

Reset the embroidering area with the PC or move the hoop to

the sewable position.

E-27 Hoop overhang (+X, -X, +Y)

E-28 Hoop overhang (-Y)

E-29 Hoop overhang (+X, -Y)

Pattern or the needle position is out of the embroidering area.

Reset the embroidering area with the PC or move the hoop to

the sewable position.

E-2A Hoop overhang (+Y, -Y)

E-2B Hoop overhang (+X, +Y, -Y)

E-2C Hoop overhang (-X, -Y)

E-2D Hoop overhang (+X, -X, -Y)

E-2E Hoop overhang (-X, +Y, -Y)

E-2F Hoop overhang (+X, -X, +Y, -Y)

E-31 Needle overhang (+X)

E-32 Needle overhang (+Y)

E-33 Needle overhang (+X, +Y)

E-34 Needle overhang (-X)

Pattern or the needle position is out of the embroidering area.

Reset the embroidering area on the panel or move the hoop to

the sewable position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother BE-1204B-BC - PC control in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother BE-1204B-BC - PC control Manual

Product: