644489

Brother BE-1204B-BC - PC control Manual

242
Zoom out
Zoom in
Previous page
1/262
Next page
11-2 BE-1204B-BC • BE-1206B-BC
Chapter 11 Error code list
Code Error Measures
E-00 No error occurs.
E-01
Either motor of main shaft, X- or Y-axis, or
lower shaft has locked.
E-02
Overtravel occurs during home position
detecting movement.
This is not usually displayed.
E-03
The stop switch is pressed during home
position detecting movement.
Press the
or turn on the F/B switch on the head to either
side to restart the home position detecting movement again.
E-04 Home position detection out of range This is not usually displayed.
E-05 Needle stop position error
Adjust the pulley stop position (100 degrees) above the needle
and press the
or turn on the F/B switch on the head to
either side.
E-06 Needle bar case position error
Adjust the position of needle bar case manually, then press the
or turn ON the F/B switch on the head to either side. If the
same error occurs again, the color change proper position
sensor is faulty.
E-07 Needle bar case lock
Press the
or turn on the F/B switch on the head to either
side. If the same error occurs again, the color change
mechanism is faulty.
E-08
Stop switch or emergency switch was pressed
while the needle bar case is traveling.
This is not usually displayed.
E-09 X-axis home position detection error
Turn the power off and on once. If the same error occurs
again, the X-axis mechanism is faulty.
E-0A Thread breaking error
After passing through the thread, press the
or turn on the
F/B switch on the head to either side.
E-0B Stop or emergency stop during sewing This is not usually displayed.
E-0C Lower thread broke during embroidering.
After the replacement of the lower thread, press the
or
turn ON the F/B switch on the head to either side.
E-0D
The machine does not return to the home
position.
E-0E Mending finish
This is not usually displayed.
E-0F Failed in the reading of needle bar No.
Press the
or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty, or the color change position sensor is
faulty.
E-10 Abort by the beam sensor ON
Press the or turn ON the F/B switch on the head to either
side.
E-11 Failed in the reading of X home position sensor
Press the
or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty.
E-12 Failed in the reading of X home position sensor
Press the
or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty.
… 242 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother BE-1204B-BC - PC control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother BE-1204B-BC - PC control in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info