579538
208
Zoom out
Zoom in
Previous page
1/238
Next page
Troubleshooting
196
7
The document is
jammed.
Paper dust has accumulated on the
surface of the Pick-up Roller or
Separation Pad.
There are foreign objects in the
document feeder.
Your document is not acceptable for
the machine.
A receipt is scanned without using
the Receipt Carrier Sheet.
Clean the Separation Pad and Pick-up Roller.
To clean the Separation pad, see
Replace the
Separation Pad on page 175 to refer how to pull
the Separation Pad out from the machine, clean
the rubber side of the Separation Pad with a soft
lint-free cloth moistened with water, and then
attach the Separation Pad in the machine. To
clean the Pick-up Roller, see
Clean the Scanner
on page 169.
Remove any foreign objects or ripped paper
from the document feeder.
Make sure your document is acceptable for the
machine. See
Acceptable Document
on page 28.
Scan the receipt using the Receipt Carrier
Sheet. See
Loading a Receipt on page 37, and
Scan Receipts Using BR-Receipts (Windows
®
)
on page 89 or Scan Receipts Using BR-
Receipts (Macintosh) on page 101.
The scan quality is
poor.
Paper dust has accumulated on the
surface of the Pick-up Roller or
Separation Pad.
Paper dust has accumulated on the
surface of the glass strips inside the
machine.
The resolution is too low.
Clean the Separation Pad and Pick-up Roller.
To clean the Separation pad, see
Replace the
Separation Pad on page 175 to refer how to pull
the Separation Pad out from the machine, clean
the rubber side of the Separation Pad with a soft
lint-free cloth moistened with water, and then
attach the Separation Pad in the machine. To
clean the Pick-up Roller, see
Clean the Scanner
on page 169.
Clean the glass strips inside the machine. See
Clean the Scanner on page 169.
Increase the scanner resolution.
The machine pauses
for about 3 seconds
between each page
when scanning.
The machine has entered motor save
mode. If you scan continuously, the
internal temperature of the machine
may increase, causing the machine to
enter motor save mode.
NOTE
The length of the pause may vary
depending on the scanning
conditions.
This is normal and you may continue to scan. If you
scan continuously, the internal temperature of the
machine may increase, causing the machine to
enter motor save mode.
Bleed through is seen
in the scan data.
The settings are not appropriate for the
type of document being scanned.
Check the Bleed Through Prevention/Remove
Background Colour check box.
Difficulty Cause Suggestions
208


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother ADS-1600W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother ADS-1600W in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother ADS-1600W

Brother ADS-1600W User Manual - German - 239 pages

Brother ADS-1600W User Manual - Dutch - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info