579538
207
Zoom out
Zoom in
Previous page
1/238
Next page
Troubleshooting
195
7
The scanned image is
missing.
The Document Guides are not
adjusted to fit the width of the
document.
The Auto Deskew feature was set to
On when the document was
scanned.
The settings are not suitable for your
document. For example, a A4-size
document was fed when A5 was
selected as document size.
The card was loaded horizontally.
Adjust the Document Guides to fit the width of
the document. When Scan Size is set to Auto
and you are scanning a document that contains
multiple page sizes, insert narrow pages straight
and as close to the centre of the machine as
possible. If the document does not stay straight
while feeding, use Continuous Scanning.
Set Auto Deskew to Off.
Make sure the document size settings are
suitable for your document.
Load the card vertically.
The scanned image is
skewed.
The Document Guides are not
adjusted to fit the width of the
document.
The Auto Deskew feature was set to
Off when the document was
scanned.
Adjust the Document Guides to fit the width of
the document. When Scan Size is set to Auto
and you are scanning a document that contains
multiple page sizes, insert narrow pages straight
and as close to the centre of the machine as
possible. If the document does not stay straight
while feeding, use Continuous Scanning.
Set Auto Deskew to On.
The scan speed is too
slow.
The resolution is not suitable for your
document.
Decrease the scanner resolution.
The document was not
fed.
Paper dust has accumulated on the
surface of the Pick-up Roller or
Separation Pad.
Too many documents are loaded in
the document feeder at a time.
There are foreign objects in the
document feeder.
Your document is too thin or too
thick.
Remote Setup is in process.
Paper ejection has paused.
The Separation Pad Cover is not
properly closed.
Clean the Separation Pad and Pick-up Roller.
To clean the Separation pad, see
Replace the
Separation Pad on page 175 to refer how to pull
the Separation Pad out from the machine, clean
the rubber side of the Separation Pad with a soft
lint-free cloth moistened with water, and then
attach the Separation Pad in the machine. To
clean the Pick-up Roller, see
Clean the Scanner
on page 169.
Make sure your document is acceptable for the
machine. See
Acceptable Document
on page 28.
Remove any foreign objects or ripped paper
from the document feeder.
Cancel Remote Setup.
Finish ejecting the paper.
Securely close the Separation Pad Cover until
the hooks fit into the Front Cover.
Difficulty Cause Suggestions
207


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother ADS-1600W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother ADS-1600W in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother ADS-1600W

Brother ADS-1600W User Manual - German - 239 pages

Brother ADS-1600W User Manual - Dutch - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info