780273
21
Zoom out
Zoom in
Previous page
1/26
Next page
21
c) Drive Unit
Observe all safety information and instruc-
tions, both in this manual and in all other ma-
nuals enclosed with the e-bike.
Failure to follow the safety instructions may result
in electric shock, fire and/or serious injury.
Keep these operating instructions in a safe
place for future reference.
Never open the drive unit. This is maintenan-
ce-free and may only be repaired by qualified
personnel and using original spare parts.
This ensures the safety of the drive unit. Unauthori-
zed opening of the drive unit will void the warranty.
All components belonging to the e-bike system
as well as components which are mounted on
the drive unit (e.g. chainring, chainring holder,
pedals) may only be exchanged for compo-
nents approved by the bicycle manufacturer.
This protects the drive unit from damage (e.g. due
to overload).
If the e-bike system is accidentally activated, there
is a risk of injury.
The pushing aid may only be used when actu-
ally pushing the e-bike.
If the wheels of the e-bike do not have contact
with the ground when using the pushing aid, there
is a risk of injury.
Do not make any changes to your e-bike
system. Do not attempt to increase the per-
formance of your e-bike system.
Otherwise, you will reduce the service life of the
components and risk damage to the e-bike sys-
tem and the e-bike. In addition, any manipulation
of the e-bike system will void any warranty and
guarantee claims on your e-bike. Improper hand-
ling of the system will also endanger your own sa-
fety and that of other road users.
By making unauthorized changes to the e-bike
system, you risk high personal liability costs or
even criminal prosecution in the event of accidents
caused by manipulation.
Observe all national regulations for the regis-
tration and use of e-bikes.
Caution: Touching the motor housing may
cause burns.
Intended Use
The drive unit is intended exclusively for driving
your e-bike and must not be used for other pur-
poses.
Operation
For information on operating your e-bike with the
Brose drive, please refer to the operating instruc-
tions of the control unit.
Driving Information and Tips
When does the e-bike drive work?
The Brose e-bike system enables the cyclist to be
supported by an electric motor in a Pedal Elect-
ric Cycle (PEDELEC). The support depends on the
force applied to the pedals by the cyclist. Support
from the e-bike drive is therefore only provided
when the cyclist pedals. This applies regardless of
the support level.
The e-bike drive switches itself off automatically at
speeds above 25/45 km/h. If the speed falls below
25/45 km/h, the support automatically resumes.
One exception is the push aid function, which all-
ows the e-bike to be pushed more comfortably at
low speeds without pedaling. When using the pus-
hing aid, the pedals can also rotate.
You can ride the e-bike like a normal bicycle at any
time without support.
Familiarization
Take some time to get used to the e-bike before
you use it in normal traffic. Test the different levels
of support until you feel confident using the pro-
duct. Before longer rides, gain experience of how
different parameters and environmental conditions
affect the range of your e-bike.
Safety Information
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brose Bristol E-Touring at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brose Bristol E-Touring in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info