780273
22
Zoom out
Zoom in
Previous page
1/26
Next page
22
Engine Set-Ups
The Brose e-bike system supports various engine
set-ups. Together with the bicycle manufacturers,
these are individually adjusted for each bicycle
model. Detailed information on the motor set-up
of your e-bike can be obtained from your bicycle
manufacturer and your bicycle dealer.
Influences on the Range
The distance range is influenced by many factors,
such as:
Support level
The higher the support level is selected with other-
wise the same conditions, the lower the range is.
Shifting behavior
Type of tires
Tire pressure
Age, maintenance and charge level of the bat-
tery pack
Route profile (gradients) and route condition
(road surface)
Weather conditions (e.g. headwind, ambient
temperature etc.)
Weight of the e-bike
Payload
Maintenance & Cleaning
Avoid contact of the drive unit with aggressive
cleaning products and care products, especially
penetrating oils and brake cleaners.
The drive unit must neither be immersed in water
nor cleaned with a high-pressure washer.
For service or repairs to the e-bike, please contact
an authorized bicycle dealer.
Service
The drive unit must be inspected by a Brose-certi-
fied service center after a service life of 15,000 km.
Information on the service center responsible can
be obtained from your bicycle dealer.
Disposal
Drive unit, display unit and control unit, battery
pack, speed sensor, accessories and packaging
are to be recycled in an environmentally friendly
manner. Do not dispose of e-bikes and their com-
ponents in household waste!
For EU countries only:
Technical Data
According to the European directive
2012/19/EU, electrical appliances
that are no longer fit for use must
be collected separately, and ac-
cording to the European directive
2006/66/EC, defective or used bat-
teries must be collected separately
and reused in an environmentally
sound manner.
Brose drive unit 25 km/h
Brose material number C16162/C91143/C97272
Dimensions 213x150x128 mm
Weight 3,400g
Nominal voltage 36 V
Protection class IP56
Torque max. 90nm
Continuous rated power 250 W
Pushing aid up to 6 km/h
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brose Bristol E-Touring at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brose Bristol E-Touring in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info