504591

Brita 3-Way Water Filter Dispenser Manual

6
Zoom out
Zoom in
Previous page
1/13
Next page
ENGLISH 5
3.3 Step 3: Installing the BRITA 3-Way Water
Filter Dispenser
To install the BRITA 3-Way Water Filter Dispenser, fi rstly ensure
you have all the components required (see fi g. 5).
1. BRITA 3-Way Water Filter Dispenser (design may differ) with
3 hoses
2. Shank (WD 3010 different design)
3. Base (models WD 3030 and WD 3040 only)
4. Joint
5. Flat Gasket
6. Flange
7. Hex nut
Please make sure that there is enough room for the P 1000 fi lter
cartridge, the hoses and the BRITA electronic cartridge exchange
indicator under the sink.
1.
2.
3.
4.
5.
6.
7.
(fi g. 5)
First of all, dismount your existing kitchen tap.
A a) Turn off the cold and hot water supplies
b) Please make sure you release any pressure by opening
all levers.
!
No water should run through the existing kitchen tap!
c) Unscrew the existing hoses from the cold and hot water
supply.
!
We recommend placing a suitable container under the water
supply as there will be water left in the hoses which will run
down when you unscrew them!
d) Unscrew your kitchen tap – there is no standard mounting but
in general a pipe wrench will help you to dismount it.
e) Pull out both your kitchen tap and the hoses.
You’re now ready to install the BRITA 3-Way Water Filter Dispenser
(see fi g. 5).
First of all, screw the shank (2) into the 3-Way Water Filter
Dispenser (1).
Screw the hoses into the dispenser (see fi g.6).
Screw the M8 connector of the hose with the blue stripe into the
hole H 1.
Screw the M8 connector of the hose with the red stripe into the
hole H 2.
Screw the M8 connector of the 800 mm hose into the hole H 3.
H1
H3 H2
(fi g. 6)
!
Ensure the connections are screwed tight, but avoid over
tightening!
Then put the base (3) over the hole and fi x the BRITA 3-Way Water
Filter Dispenser (1) in place using the supplied counter plate (4), the
gasket (5), the locking ring (6) and the hexagon nut (7).
3.4 Step 4: Attaching the hoses
!
We recommend that you arrange all the parts you need in
front of you before you begin.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brita 3-Way Water Filter Dispenser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brita 3-Way Water Filter Dispenser in the language / languages: English as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info