Manual Brevi Tazio TT (page 16 of 72) (English, German, French, Italian, Portuguese, Spanish)

768834

Zoom out

Zoom in

1/72

2. Press the button of the shoulder belt height adjuster 10 at the

rear of the seat shell and tilt the shoulder belt height adjuster 10

towards you (g. F31).

3. Move the shoulder belt height adjuster 10 into the top position

and x the position by releasing the button of the shoulder belt

height adjuster.

4. Loosen the 5-point harness of the child seat as much as pos-

sible. Unhook the shoulder belts 08 on the back side of the child

seat from the connecting piece 39 (g. F32) .

5. Snap the connecting piece 39 in the provided storage (g. F33)

6. Slide the belt loops off of the plastic extensions 41 of the shoul-

der belt height adjuster 10 (g. F34).

Front side of the child seat:

7.Pull below both, the shoulder pads 19 and the two shoulder

belts 08 to the front through the slots 40 (front side of the child

seat) (g. F35).

8. Open the harness buckle 21 (press the red release button) (g. F36)

9. Open the left and right Velcro 42 on the lower part of the cover

43 and lift the cover piece to the front. Slide the buckle latches 20

down into the storage compartments (g. F37).

10. Roll the shoulder belts 08 together and place them also into

the storage compartments (g. F38).

11. Reposition the two cover parts to the rear and lock the Velcro

42 on the left and right side of the cover back side (g. F39).

12. Lift the recline handle and pull at the front to fully recline the

child seat (g. F40).

13. Grasp the metal plate 33 from underneath and turn it into a

vertical position.

14. Push upwards and slide the metal plate 33 through the slot 34.

Remove the harness buckle (g. F41).

7.REFITTING THE 5-POINT HARNESS

1. Squeeze the adjustment handle 12 at the rear of the headrest

07 and push the headrest into the lowest position (g. F42).

2. Open the left and right buttons Velcro on the lower part of the

cover 43 and lay the cover piece on the seating area (g. F43).

3. Take the shoulder belts 08 and the buckle latches 20 from the

storage compartment 47 and unroll the shoulder belts (g. F44).

4. Fold back the two cover pieces and close the left and right

poppers 42 on the lower part of the cover(g. F45).

5. Retting harness buckle 21 and crotch pad. Group 1 (9-18 kg)

use the belt slot closest to the backrest (a) ,for Group 2 (15-25 kg)

use the one furthest away (b) .

6. Take the harness buckle 21 and hold the metal plate 33 vertical-

ly. Push it with the narrow side upwards through the belt slot (a) or

(b) into the seat shell from above (g. F46, F47).

7. Ensure by looking underneath the seat that the metal plate 33

is in a horizontal position and check the installation by pulling on

the harness buckle 21 several times(g. F47).

8. Guide the two buckle latches 20 together and engage them

before putting them into the harness buckle 21 - this should make

a click noise (g. F49).

CAUTION! The lap belts must not be twisted or swapped.

9. Thread the shoulder pads 19 onto the shoulder belts 08 in the

correct orientation as shown ensuring there are no twists. Align

the two loops of the shoulder belts 08 and strap loops of the

shoulder pads 19 (g. F50) .

10. Pull the shoulder belts 08 and the strap loops of the shoulder

pads 19 through the slots 40 (g. F51).

11. Pull the strap loops of the shoulder pads 19 onto the plastic

extensions 41 of the shoulder belt height adjuster 10 (g. F52).

TIP

the strap loops of the shoulder pads should be the lower loop.

CAUTION! The shoulder belts 08 must not be twisted or swapped.

12. Take the connecting piece 39 from the provided storage on the

back side of the child seat.

13. Hook the shoulder belts 08 back onto the connecting piece 39.

The left loop on the left arm of the connecting piece and the right

loop on the right arm (g. F53).

8. CARE AND MAINTENANCE

8.1 Care for the harness buckle

It is vital for the safety of your child that the harness buckle works

correctly.

Malfunctions of the harness buckle are usually caused by accu-

mulations of dirt or foreign bodies.

Malfunctions are as follows:

• The buckle latches are ejected only slowly when the red release

button is pressed.

• The buckle latches will no longer lock home (i.e. they are ejected

again if you try to push them in).

• The buckle latches engage without an audible “click”.

• The buckle latches are difcult to insert (you feel resistance).

• The buckle only opens if extreme force is applied.

Remedy:

wash out the harness buckle so that it functions properly once

again

Cleaning the harness buckle

1.Follow section 6 to Remove the harness buckle 21 (g. F54,

F55, F56, F57)

2.Soak the harness buckle 21 in warm water with light washing-up

liquid for at least an hour. Then rinse and dry it thoroughly.

8.2 Cleaning

The cover can be removed and washed. Please observe the in-

structions on the washing label of the cover.

Removing the cover

A) Headrest

1. Move the headrest of the child seat to the upper position (g.

F58).

2. Take the elastic seam of the cover from the hooks at the back

side of the headrest (g. F59) and remove the cover of the headrest.

B) Cover

1. Undo the hooks on the bottom side (g. F60).

2. Remove the cover (g. F61).

Re-tting simply follow the steps in the opposite order.

9.WARRANTY

We guarantees its products against any manufacturer defect for a

period of 2 years, start from the day of purchase.

1. The warranty does not cover defects or failures caused by

534-01-161124-00 ISTRUZIONI SEGGIOLINO AUTO TAZIO TT.indd 16 30/11/2016 15.29.42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brevi Tazio TT in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brevi Tazio TT Manual

Product: