Manual Brevi Tazio TT (page 14 of 72) (English, German, French, Italian, Portuguese, Spanish)

768834

Zoom out

Zoom in

1/72

3.2 Adjusting the headrest in 5-point harness in-

stallation

A correctly adjusted headrest 07 ensures optimal protection for

your child in the safety seat: the headrest 07 must be adjusted

so that the shoulder belts 19 are at the same level as your child’s

shoulders (g. F3).

CAUTION! The shoulder belts 19 must not run behind the back of

the child or at ear height or above the ears.

The shoulder belts are adjusted as follows:

1. Press the adjusting button 26 and at the same time pull both shoul-

der belts 08 forwards. Do not pull on the shoulder pads 19, loosen the

5-point harness of the child seat as much as possible. (g. F4)

Back side of the child seat:

2. Press the button of the shoulder belt height adjuster 10 at the

rear of the seat shell and tilt the shoulder belt height adjuster 10

towards you (g. F5).

3. Slide the shoulder belt height adjuster 10 to select the correct

height of the shoulder belts 19 and engage it in the position that

ts for your child by releasing the button (g. F5).

3.3. Adjusting the headrest in vehicle belt instal-

lation

A correctly adjusted headrest 07 ensures that the diagonal seat

belt section 11 is optimally positioned, and gives your child the

optimal protection.

The headrest 07 must be adjusted so that there is a space two

ngers wide between the headrest 07 and your child’s shoulders.

(g. F6)

To adjust the height of the headrest to t your child:

1. Squeeze the adjustment handle 12 on the back of the headrest

07. This unlocks the headrest (g. F7).

2. You can now move the unlocked headrest 07 to the desired

height. As soon as you release the adjustment handle 12 the he-

adrest 07 will lock into place.

3. If the position of headrest 07 is still not x child, additional

adjustment can be made through the shoulder belt height adjuster

10, as explained in Section 3.2

4. INSTALLATION

4.1 Group 1 (9-18 kg) with isox + top tether +

5-point harness

1. Make sure that the child seat’s 5-point harness is installed cor-

rectly (see section 7).

2. Follow the steps in section 3.1 (to prepare the ISOFIX.)

3. Follow the steps in section 3.2 (to adjust headrest.)

4. Take the Top Tether and lay it over the child seat.

5. Place the child seat facing in the direction of travel on the ve-

hicle seat.

6. Grasp the child seat with both hands and slide the two locking

arms 15 rmly into the insert guides 02 until the locking arms en-

gage with a clicking noise on both sides, the ISOFIX indicator 04

turn green on both sides (g. F8, F9).

CAUTION! The locking arms are only correctly engaged if both of

the safety buttons 04 are completely green.

7. Push the child seat towards the backrest applying rm, even

pressure on both sides (g. F10).

8. Shake the child safety seat to make sure it is safely attached

and re-check the green safety buttons 04 to make sure that both

of them are completely green.

9.Take the top tether and if required, lengthen the belt by pressing

the top tether brake button to release the strap, pulling to adjust

as necessary (g. F11).

10.Hook the snap hook 17 into the Top Tether anchoring point

recommended in your vehicle owner’s guide. Look for this

symbol in your vehicle(g. F12).

11. To tension the top tether, remove any slack by pulling on the

free end of strap until it is suitably tightened. The top tether will

be properly tightened when the tension indicator turns completely

green(g. F13).

12. Follow the steps in section securing your child with 5-point

harness (see section 4)

4.1.1 Securing your child with 5-point harness

The more snugly the harness ts over your child’s body, the better

your child will be protected. Therefore avoid putting thick clothes

on your child under the belt.

1. Open the harness buckle 21 by pressing red button (g. F14).

2. Press the adjusting button 26 and at the same time pull both

shoulder belts forwards. Do not pull on the shoulder pads 19 (g.

F14) .

3. Have your child sit down in the child seat.

4. Make sure that your child’s back lies at against the backrest

of the child seat.

5. Guide the two buckle latches 20 together and engage them

before putting them into the harness buckle 21 - this should make

a click noise (g. F15, F16, F17).

6. Pull on the adjuster strap 09 until the harness lies at and is

close against your child’s body (g. F18).

For the safety of your child, before every journey in the car check

that:

• the child safety seat is engaged on both sides with the ISOFIX

locking arms 15 in the ISOFIX attachment points 01 and that both

green safety buttons 04 are completely green (g. F8)

• the child seat is rmly installed in the vehicle

• the Top Tether (g. F13) is tightly tensioned over the backrest of

the car seat and the tension indicator is green

• the straps of the child safety seat are close to the body without

constricting the child

• the shoulder belts 08 are correctly adjusted and the straps are

not twisted

• the shoulder pads 19 are at the same level as your child′s shoul-

ders (g. F3)

• the buckle latches 20 are engaged in the harness buckle 21

(g. F16)

4.2 Group 1 (9-18 kg) vehicle belt + 5-point har-

ness

1. Make sure that the child seat’s 5-point harness is installed cor-

rectly (see section 7)

2. Follow the steps in section 3.2 (to adjust headrest)

3. Place the child seat facing in the direction of travel on the ve-

hicle seat

534-01-161124-00 ISTRUZIONI SEGGIOLINO AUTO TAZIO TT.indd 14 30/11/2016 15.29.41

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brevi Tazio TT in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brevi Tazio TT Manual

Product: