632832
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
NOTE!
To ensure the ventilation indicator can function as required, the remote sensor
must actually be placed outdoors, otherwise the result can not be calculated
properly.
IMPORTANT!
Windows should be opened wide for a short time (a few minutes) for effective
ventilation. If possible, open windows on opposite sides of the apartment (full
ventilation).
Even if ventilation is not recommended by the weather station due to the
humidity, the apartment should be ventilated regularly. This contributes to the
reduction of pollutants and other volatile compounds in the room air.
Main unit signal receiving check
The transmission range is about 50 meters from the remote station to the main
unit (in open area). The main unit should receive the temperature/humidity
information from the transmitter within 3-4 minutes after set-up.
Should the main unit not receive information from transmitter within 3-4 minutes
after setting up, please check following steps:
1. Press and hold the touch control CH/ (7c) for 2-3 seconds to re-start
receiving from the transmitter; the data will normally be received within 3
minutes.
2. If the first step does not yield a desirable solution, please remove the batteries
and re-install them (hardware reset).
At the same time, please make sure the following:
1. The main unit as well the as transmitter should be at least 5-6.5 feet (1.5-2
meters) away from any interfering sources, such as computer monitors or
TV sets.
2. The main unit should not stand close to metal window frames.
3. Please do not using other electrical products, such as headphones or
speakers, operating on the same signal frequency (433 MHz).
4. Electrical devices operating on the same signal frequency may also cause
interference. This can include devices used in the neighborhood as well.
Main unit channel setting
1. The main unit can be connected with a maximum of up to 3 transmitters.
2. Press the touch control CH/ (7c) to switch between the displays of each
channel. The main unit will display the information of the corresponding
transmitter. When the symbol is displayed near the channel information
the automatic display rotation is activated. The display changes between the
DE
GB
FR
NL
IT
PT
Garantie / Warranty
ES
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-07400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-07400 in the language / languages: English, German as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 70-07400

Bresser 70-07400 User Manual - Dutch - 16 pages

Bresser 70-07400 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info