632832
17
Zoom out
Zoom in
Previous page
1/28
Next page
17
Low battery display
When batteries need to be replaced the respective low battery indicator
for the main unit (10) or the remote sensor (5) will be shown on the display of
the main unit.
USING TABLE STAND OR WALL MOUNTING
The main unit and the remote sensor can be placed on a flat surface (e.g. table)
with the stand (foldable) (13, 21) or mounted on walls using the recessed screw
hole (14, 18).
OPERATION
Receiving measurements
Once batteries are placed in the remote unit, it will start transmitting temperature
readings at roughly 60 second intervals. As soon as batteries are installed in
the main unit it will start searching for a signal from the remote sensor for about
3-4 minutes. Upon successful reception of the signal, the outdoor temperature
will be displayed on the main unit. The main unit will automatically update its
readings at about 60 second intervals.
Temperature and humidity
1. Press the touch control °C/°F/SET (7b) to switch the display between °C
or °F. The display will change for the indoor temperature as well as for the
outdoor temperature.
2. Once the batteries are installed the main unit will start displaying the interior
measurement information. The main unit will display the information from the
remote sensor for the first time approximately 3-4 minutes after the power
supply was established.
Humidity indicator
The humidity indicator displays the following conditions
WET Wet. Indoor humidity between 66% and 95%
COMFORT Comfortable. Indoor humidity between 45% and 65%
DRY Dry. Indoor humidity between 20% and 40%
DE
GB
FR
NL
IT
PT
Garantie / Warranty
ES
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-07400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-07400 in the language / languages: English, German as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 70-07400

Bresser 70-07400 User Manual - Dutch - 16 pages

Bresser 70-07400 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info