632832
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
information of the connected remote sensors every 10 seconds.
NOTE!
The function to change the channels by pressing the CH/ button can be
used only if more than one remote sensor is connected with the main unit.
Otherwise this function is disabled.
Set current time and measurement data storage
1. Press and hold the °C/°F/SET (7b) button in normal display mode for 3
seconds to enter into time setting mode.
2. The value to be set will start flashing.
3. Press MEM/ (7a) or CH/ (7c) to change the value.
4. Press °C/°F/SET button to confirm and go to the next value to be changed.
5. The setting order is hour >> minutes >> 12 or 24 hour mode >> 24 hour MIN/
MAX measurement data storage ON/OFF
NOTE!
When choosing ON for 24 hour measurement data storage all stored MIN/
MAX values for temperature and humidity will be deleted daily at 0:00 h!
When choosing OFF the data will be stored indefinitely until a battery change
is required.
6. If there is no operation for 20 seconds, the existing setting will be saved
and the device returns to normal display mode. Press °C/°F/SET button
again to confirm and exit setting.
Background illumination
Press the button for the background illumination (12) to turn it on. The
background illumination will be turned off automatically after approx. 5 seconds.
Sensor function
1. Move the CH switch to the position (1-3) that corresponds with the channel
which will be used for transmission (select channel 1 if only one remote
sensor is connected). If you would like to connect more than one remote
sensor with the main unit, different channels need to be selected for each
sensor.
2. Press °C/°F to change the temperature display of the transmitter
3. Once the weather station receives radio signals from the sensors, the
alternating temperature values of the different channels will be updated on
the weather station every 1-2 minutes.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bresser 70-07400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bresser 70-07400 in the language / languages: English, German as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bresser 70-07400

Bresser 70-07400 User Manual - Dutch - 16 pages

Bresser 70-07400 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info