Manual Brandt AD875XE1 (page 27 of 64) (English, German, Danish, French)

487384

Zoom out

Zoom in

1/64

2 / INSTALLING YOUR APPLIANCE

• Filtering mode

- Secure the telescopic structure to the bracket

using 4 screws (provided), running the power

cable through the hole in the bracket (Fig.5).

Adjust the height of the telescopic structure

using the 4 retaining screws C (Fig. 6) bearing

in mind that the height of the hood is 110 mm and

that the distance of the hood from the hob must

be at least 650 mm (Fig.7).

- Insert the air baffle (F) into the structure (Fig.11)

Through the openings G (Fig. 12), fit the flange

(W) to the baffle (F) and lock it with a rotary

movement. Fit a flexible hose (125 mm diameter)

to the flange (W) for air evacuation (Fig. 12).

- Take the upper flue (the one with the round

slots) and fit it on the telescopic structure with

the slots at the top; secure the flue to the bracket

with 2 screws (Fig. 13). Take the lower flue and

fit it in the same way as the upper flue; slide it

upwards and secure it in that position with some

adhesive tape (Fig. 9).

- Take the reducer (Fig. 14R) and fit it on the air

vent of the hood, exercising slight pressure.

- Secure the hood to the telescopic structure by

means of 4 screws (provided) - Fig. 15.

- Secure the air exhaust pipe to the reducer (R)

through the openings H (Fig. 15).

- Make the electrical connection by means of the

power cable.

- Remove the adhesive tape and let the lower flue

slide down, gently resting it on the hood .

fig. 11

fig. 13

fig. 12

fig. 14

fig. 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt AD875XE1 in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt AD875XE1 Manual

Product: