Manual Brandt AD875XE1 (page 26 of 64) (English, German, Danish, French)

487384

Zoom out

Zoom in

1/64

Warning

This is the filtering version of your

cooker hood; you must first remove the

charcoal filters.

2 / INSTALLING YOUR APPLIANCE

Tip

For optimal use of your appliance, we

recommend that you connect the hood to a

150 mm-diameter flue (not delivered with the

appliance). Minimise the number of angles

and bends and the lengths of the flue. In

the event that the hood will be operated

using out-door evacuation, you should

ensure a sufficient inflow of fresh air to

avoid a pressure deficiency in the room.

screws C (Fig. 6) bearing in mind that the height

of the hood is 110 mm and that the distance of

the hood from the hob must be at least 650 mm

(Fig. 7).

- Take the upper flue (the one with the round

slots) and fit it on the telescopic structure with

the slots at the bottom; secure the flue to the

bracket with 2 screws (Fig.8). Take the lower

flue and fit it in the same way as the upper flue;

slide it upwards and secure it in that position with

some adhesive tape (Fig. 9).

- Secure the hood to the telescopic structure by

means of 4 screws (provided) - Fig. 10.

- Through the openings H (Fig. 10) secure the air

exhaust pipe to the air vent of the motor (M).

- Make the electrical connection by means of the

power cable.

- Remove the adhesive tape and let the lower flue

slide down, gently resting it on the hood .

fig. 6

fig. 5

fig. 7

fig. 9

fig. 8

fig. 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brandt AD875XE1 in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brandt AD875XE1 Manual

Product: