Manual Boss ME-80 - Guitar Multiple Effects (page 6 of 160) (English, German, Dutch, French, Italian, Portuguese, Spanish)

719222

Zoom out

Zoom in

1/160

Outputting Sounds

Switching the Unit On and O

Switching the unit on

Once everything is properly connected (p. 3), be sure to follow the

procedure below to turn on their power. If you turn on equipment in

the wrong order, you risk causing malfunction or equipment failure.

* Before turning the unit on/o, always be sure to turn the volume

down. Even with the volume turned down, you might hear some

sound when switching the unit on/o. However, this is normal

and does not indicate a malfunction.

* This unit is equipped with a protection circuit. A brief interval

(afew seconds) after turning the unit on is required before it will

operate normally.

1. Hold down the ME-80’s [POWER] switch for several

seconds to turn on the power.

2. Turn on the power of the connected guitar amp.

Switching the unit o

1. Before turning o the power, conrm the following.

• Have you minimized the volume of the connected equipment?

• Have you saved any patches containing setting that have been

changed? (p. 12)

2. Turn o the power of your guitar amp and any other

connected equipment.

3. Hold down the ME-80’s [POWER] switch for several

seconds to turn o the power.

* The power to this unit will be turned o automatically after

a predetermined amount of time has passed since it was

last used for playing music, or its buttons or controls were

operated (Auto O function).

* If you do not want the power to be turned o automatically,

disengage the Auto O function (p. 18).

NOTE

• Any settings that you are in the process of editing will be lost

when the power is turned o. If you have any settings that you

want to keep, you should save them beforehand.

• To restore power, turn the power on again.

Adjusting the Volume (OUTPUT LEVEL)

1. Adjust volume with the [OUTPUT LEVEL] knob.

Tuning the Guitar (TUNER)

1. Hold down the [MEMORY/MANUAL] pedal for at least two

seconds.

The tuner is switched on.

2. If necessary, you can change the reference pitch.

The reference pitch is shown when you press the [EDIT] button.

Each press of the button increases the value within the range of 435

Hz to 445 Hz. When the value is over 445 Hz, the value goes back to

435 Hz again. If you don’t press the [EDIT] button for 2 seconds, it

will go back to the normal tuner.

Display Pitch

35 to 45 435 to 445 (Hz)

MEMO

• The reference pitch appears in the display for a brief time.

• The reference pitch setting is saved automatically, so there is no

need to make this setting each time you tune.

• The reference pitch was set to 40 (440 Hz) when the unit was

shipped from the factory.

3. Play a single open note on the string to be tuned.

The name of the note closest to the pitch of the string played

appears in the display.

(C)

(F)

(#symbol)

(G)

(D)

(A)

(E)

(B)

4. Tune so that both tuning guide indicators light up.

Too low Too high

(rapid ashing)

Tuned

5. To turn the tuner o, press any of the pedal switches.

Adjusting outputs when using a tuner

When the tuner is on, you can choose whether the sound is output from the

Gt. AMP OUTPUT and REC OUT/PHONES jacks or not. If you’ve specied that

the sound is output, you can use the expression pedal to adjust the volume.

For details, refer to “Making Global Settings (System Settings)” (p. 18).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boss ME-80 - Guitar Multiple Effects in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 70,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boss ME-80 - Guitar Multiple Effects Manual

Product: