719222
4
Zoom out
Zoom in
Previous page
1/160
Next page
2
Panel Descriptions
Top Panel
Eect setting knobs
Used to make eect settings for the
ME-80 (p. 5 to p. 11).
Display
Various information about the ME-80 is
shown here.
MEMO
BATTERY LOW indicator on the
display will blink if the batteries
are low. Replace them with new ones.
[OUTPUT LEVEL] knob
Controls the volume of the Gt. AMP OUTPUT jacks and REC OUT/PHONES jack.
Buttons Explanation
[EXIT] button Pressed to go back to previous pages or cancel actions.
[WRITE] button Pressed to save/copy your patch settings (p. 12).
[CTL] button Pressed to set the functions of the [CTL] pedal in Memory Mode (p. 16).
[EDIT] button Pressed to enter Memory Edit Mode (p. 13).
Expression pedal
By strongly pressing the
toe end of the pedal, you
can turn the pedal eect on
and o (PEDAL FX indicator
will light/go out).
Pedal eect is o:
The pedal controls volume.
Pedal eect is on:
The pedal controls the eect (e. g. : wah)
that you select with the [PEDAL FX] knob.
Pedal switches
In Memory Mode, the pedal switches select banks and patches. In Manual mode, the pedal switches turn each eect on/o individually.
[MEMORY/MANUAL] pedal
Switches between Memory Mode and Manual Mode (p. 12).
To turn on the tuner, hold down the pedal for at least two seconds (p. 4).
What is Memory Mode?
You can load 72 patches that are the combinations and sound settings of
eects. Out of 72 patches, you can save up to 36 (4 patches x 9 banks) of
them to user bank (9 preset banks, 9 user banks). You can use the pedal to
switch between bank and patch immediately.
What is Manual Mode?
You can turn the eects on and o by using the pedals. You can turn the
eects on and o just like turning eects pedals mounted on an eects
board on and o individually.
In Memory Mode
Use the pedals shown below to switch between bank and patch.
Switch banks.
Switch patches.
Operate functions that have
been specied on p. 16.
In Manual Mode
Use the pedals shown below to turn an eect on and o individually.
Turn eects (COMP, OD/DS,
MOD, DELAY, AMP, EQ, REV) on
and o.
Checking knob positions
In Memory Mode (p. 12), the positions of knobs on the panel may not match the actual values of parameters.
You can get the actual parameter values to appear in the display so you can check them.
1. Turn the knob you want to check while holding down the [EDIT] button.
The value of the knob will be displayed for a limited time.
When the knob position matches its value, the tuning guide on both sides of the display will light.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boss ME-80 - Guitar Multiple Effects at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boss ME-80 - Guitar Multiple Effects in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 70,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info