719222
7
Zoom out
Zoom in
Previous page
1/160
Next page
5
Deutsch Français Italiano Español Português NederlandsEnglish
Using the Eects
COMP/FX1 (Compressor/Eect 1)
The compressor produces sustain without distortion, and makes the volume more consistent. You can also select from among a wide variety of
unique eects.
In Manual Mode and Memory Edit
Mode, use the Number [1]/[COMP]
pedal to turn on and o.
Choose the type of compressor or eect.
Type of Eect Explanation
1. COMP
Produces sustain without distortion.
It also works as a limiter to suppress loud peaks in the input signal.
2. T.WAH UP
Produces a wah eect matched to the intensity of picking.
3. T.WAH DOWN
4. OCTAVE Adds sound an octave lower and two octaves lower.
5. SLOW GEAR This removes the attack portion of the signal to create violin-like sounds.
6. DEFRETTER Simulates a fretless guitar.
7. RING MOD
By ring-modulating the guitar sound with the signal from an internal oscillator,
this eect creates a metallic sound that has no denite pitch.
8. AC SIM Changes the sound of electric guitar into the sound of acoustic guitar.
9. Single J Hum
Changes a single-coil sound to a humbucker sound.
10. Hum J Single
Changes a humbucker sound to a single-coil sound.
11. SOLO
By using this setting in conjunction with OD/DS and PREAMP, you can create a
sound suitable for solos.
Type of Eect
1 2 3
1. COMP
SUSTAIN
Sets the sustain for the sound.
ATTACK
Sets the attack (onset) of the sound.
LEVEL
Sets the volume of the eect.
2. T.WAH UP/
3. T.WAH DOWN
SENS
Sets the sensitivity of response to the input sound.
TONE
Sets the tone (brightness) of the wah.
PEAK
Sets the intensity of the wah sound.
4. OCTAVE
-1 OCT
Sets the volume level of the sound one octave
below.
-2 OCT
Sets the volume level of the sound two
octaves below.
DIRECT
Sets the volume level of the direct
sound.
5. SLOW GEAR
SENS
Sets the sensitivity of response to the input sound.
ATTACK
Adjusts the time needed for the volume to
reach its maximum.
LEVEL
Sets the volume level of the eect.
6. DEFRETTER
SENS
Sets the sensitivity of response to the input sound.
TONE
Sets the brightness of the sound.
7. RING MOD
FREQ
Sets the frequency of the signal from the internal
oscillator.
D. LEVEL
Sets the volume level of the direct sound.
E. LEVEL
Sets the volume level of the eect.
8. AC SIM
LOW
Adjusts the tone of the low frequency range.
HIGH
Adjusts the tone of the high frequency
range.
LEVEL
Sets the volume level of the eect.
9. Single J Hum
10. Hum J Single
11. SOLO
When the eect is on, the indicator lights.
1 2 3
The Connection Order of Eects
The ME-80’s eects are connected as shown below.
PEDAL FX COMP/FX1 OD/DS PREAMP EQ/FX2NS
FOOT
VOLUME
MOD DELAY REVERB
Guitar
Guitar
Amp
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boss ME-80 - Guitar Multiple Effects at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boss ME-80 - Guitar Multiple Effects in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 70,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info