Manual Bosch psb 750 rca (page 24 of 148) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

389182

Zoom out

Zoom in

1/148

24 | English

2 609 005 110 | (23.11.10) Bosch Power Tools

When the extraction force diminishes or when

the level indicator 13 is full, the dust collector

12 must be emptied. For this, press on the rif-

fled surface of the release button 16 and take

off the dust collector 12.

Empty and clean the dust collector 12. Clean the

filter element 17 by gently striking or tapping

against it.

Check the filter element 17 for damage and re-

place it as required.

Press on the holder of the filter element 17 and

pull it out. Replace the filter element 17 includ-

ing the holder. When placing on the holder

again, make sure that the rubber gasket 18 is in-

serted.

Reattach the dust collector 12 again and lock it

by pressing against the smooth surface of the

release button 16.

Removing the Extraction Device (see figure E)

For disassembly of the extraction device 11,

press release button 20 and pull off the extrac-

tion device 11 toward the front.

Stowing the Extraction Device (see figure F)

For stowing the extraction device 11 in the case,

remove the extraction device 11, slide it togeth-

er and attach clamp 21.

Attach the locking latch 22 or empty the dust

collector 12 before placing down the extraction

device.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 9.

The auxiliary handle 9 can be set to any position

for a secure and low-fatigue working posture.

Turn the wing bolt for adjustment of the auxilia-

ry handle 10 in anticlockwise direction and set

the auxiliary handle 9 to the required position.

Then tighten the wing bolt 10 again in clockwise

direction.

Adjusting the Drilling Depth (see figure G)

The required drilling depth X can be set with the

depth stop 1.

Press the button for the depth stop adjustment

3 and insert the depth stop into the auxiliary

handle 9.

The knurled surface of the depth stop 1 must

face downward.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

Changing the Tool

Keyless Chuck (PSB 750 RCE/PSB 750 RCA)

(see figure H)

The drill spindle is locked when the On/Off

switch 8 is not pressed. This makes quick, con-

venient and easy changing of the tool in the drill

chuck possible.

Open the keyless chuck 2 by turning in rotation

direction n, until the tool can be inserted. Insert

the tool.

Firmly tighten the collar of the keyless chuck 2

by hand in rotation direction o until the locking

action (“click”) is no longer heard. This automat-

ically locks the chuck.

The locking is released again to remove the tool

when the collar is turned in the opposite direc-

tion.

Keyless Chuck (PSB 650 RE/ PSB 6500 RE/

PSB 650 RA) (see figure I)

f Press the spindle lock button 25 only when

the machine is at a standstill.

The drill spindle is locked by pressing the spin-

dle lock button 25. This makes quick and easy

changing of the tool in the drill chuck possible.

Open the keyless chuck 2 by turning in rotation

direction n, until the tool can be inserted. Insert

the tool.

Firmly tighten the collar of the keyless chuck 2

by hand in rotation direction o until the locking

action (“click”) is no longer heard. This automat-

ically locks the chuck.

The locking is released again to remove the tool

when the collar is turned in the opposite direc-

tion.

OBJ_BUCH-911-003.book Page 24 Tuesday, November 23, 2010 3:18 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch psb 750 rca in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch psb 750 rca Manual

Product: