389182
23
Zoom out
Zoom in
Previous page
1/148
Next page
English | 23
Bosch Power Tools 2 609 005 110 | (23.11.10)
Assembly
f Before any work on the machine itself, pull
the mains plug.
Dust extraction (PSB 650 RA/
PSB 750 RCA) (see figures A
F)
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
As far as possible, use a dust extraction
system suitable for the material.
Provide for good ventilation of the work-
ing place.
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
f Prevent dust accumulation at the work-
place. Dusts can easily ignite.
f Use the dust/chip extraction only when
working concrete, brick and brickwork.
Wood or plastic chips can easily lead to clog-
ging.
f WARNING Fire hazard! Do not work metal-
lic materials with the extraction device
mounted. Hot metal chips can ignite parts of
the extraction device.
To achieve optimum extraction results, please
observe the following notes:
Pay attention that the extraction device faces
flush against the workpiece or the wall. This
also makes drilling at a right angle easier.
When using the extraction device, always
work with the maximum speed.
After reaching the desired drilling depth, pull
the drill bit out of the drill hole first and then
switch off the impact drill.
Use the extraction device only with the filter
element 17 mounted, as otherwise dust/
chips could access the interior of the power
tool and cause damage.
Check the condition of the filter element 17
regularly. Replace a damaged filter element
immediately.
The dust protection ring 19 can wear, espe-
cially when working with large drill-bit diam-
eters. Replace the dust protection ring when
worn/damaged.
Mounting the Extraction Device (see figure A)
Guide the extraction device 11 from the front to-
ward the bottom side of the impact drill. Pay at-
tention that the extraction device 11 faces flush
against the casing and that it is locked.
Cleaning the Extraction Device
(see figures BD)
The dust collector 12 is sufficient for approx.
10 drillings with a drilling diameter of 10 mm.
OBJ_BUCH-911-003.book Page 23 Tuesday, November 23, 2010 3:18 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch psb 750 rca at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch psb 750 rca in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info