733047
31
Zoom out
Zoom in
Previous page
1/113
Next page
English5
Bosch eBike Systems 0 276 001 SAI | (29.5.15)
The following assistance levels (max.) are available:
“OFF”: The motor assistance is switched off, and the eBike
can be moved as a normal bicycle only by pedalling. The
push assistance cannot be activated in this assistance lev-
el.
“ECO”: Effective assistance at maximum efficiency for
maximum cruising range
“TOUR”: Uniform assistance, for touring with long cruising
range
“SPORT”: Powerful assistance for sportive riding off road
as well as for urban traffic
“TURBO”: Maximum assistance, supporting highest ca-
dence for sportive riding
To increase the assistance level, press the “+” 13 button on
the operating unit until the desired assistance level appears in
the display b. To decrease the assistance level, press the
button“–” 12.
The requested motor output is displayed in indicator a. The
maximum motor output depends on the selected assistance
level.
When the on-board computer is removed from the holder 4,
the last indicated assistance level is stored; the motor-output
indicator a remains empty.
Switching the Push-assistance mode On/Off
The push-assistance feature makes it easier to push the
eBike. The speed in this function depends on the set gear and
cannot exceed 6 km/h (max.). The lower the set gear, the low-
er the speed in the push-assistance function (at full output).
The push-assistance function may only be used when
pushing the eBike. Danger of injury when the wheels of
the eBike do not have ground contact while using the push-
assistance function.
To activate the push-assistance function, press and hold the
“WALK” button 14 on the operating unit. The eBike's drive is
activated.
Note: The push assistance cannot be activated in the “OFF”
assistance level.
The push assistance is switched off if one of the following
occurs:
you release the “WALK” 14 button,
the wheels of the eBike are blocked (e.g. by actuating the
brakes or impacting against an obstacle),
the speed exceeds 6 km/h.
Back-pedalling function (optional)
For bikes with back-pedalling function, the pedals rotate
when the push aid is switched on. If the rotating pedals are
blocked, the push aid switches off.
Switching bike lights on/off
In the model in which the lighting is powered by the eBike sys-
tem, the front and rear lights can be switched on and off at the
same time via the on-board computer with button 2.
When the lighting is switched on “Lights on” appears and
when the lighting is switched off “Lights off” appears for ap-
prox. 1 s in text indication d. The lighting symbol c is dis-
played when the light is on.
Switching the bike light on and off has no effect on the back
lighting of the display.
Displays and configurations of the on-board
computer
Speed and Distance Indication
The speed indication f always displays the current speed.
The following functions are available in the function indica-
tion (combination of text indication d and value indication e):
“Clock”: Current time
“Max. speed”: Maximum speed achieved since the last
reset
“Avg. speed”: Average speed achieved since the last reset
“Trip time”: Trip time since the last reset
“Range”: Estimated range of the available battery-pack
charge (for constant conditions such as assistance level,
route profile, etc.)
“Odometer”: Display of the total distance travelled with
the eBike (cannot be reset)
“NuVinci Cadence/Gear: This menu item is displayed
only in conjunction with a Nu Vinci H|Sync automatic trans-
mission.
If you press the “i” button for longer than 1 s, you will
access the NuVinci menu item from any menu item in the
information menu.
To switch from the NuVinci Cadence” mode to the
NuVinci Gear” mode, press the “i” button for 1 s.
To switch from the NuVinci Gear” mode to the
NuVinci Cadence” mode, all you have to do is briefly
press the “i” button.
The default setting is NuVinci Cadence”.
Assistance Level Assistance Factor*
“ECO” 40%
“TOUR” 100%
“SPORT” 150%
“TURBO” 250%
* The motor output can vary for individual versions.
Range Odometer NuVinci Cadence
(1 s)
(1 s)
NuVinci Gear
OBJ_BUCH-2074-005.book Page 5 Friday, May 29, 2015 7:41 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PowerPack 500 - Intuvia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PowerPack 500 - Intuvia in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 23,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info