Manual Bosch PowerPack 500 - Intuvia (page 32 of 113) (English, German, Dutch, French, Italian, Norwegian)

733047

Zoom out

Zoom in

1/113

English–6

0 276 001 SAI | (29.5.15) Bosch eBike Systems

–“Gear”: This menu item appears only in conjunction with a

Shimano Di2 gear hub. The currently engaged gear of the

transmission is shown on the display. The newly engaged

gear will be shown briefly on the display whenever the gear

is shifted.

–“Gear: Auto”: This menu item appears only in conjunc-

tion with an SRAM automatic transmission.

By pressing the “i” button for more than 1 s, you can

switch back and forth between the “Gear: Auto” auto-

matic mode and the “Gear” manual mode.

If you are in first gear in manual mode, you can also press

the “–” 12 button to go to the “Gear: Auto” mode. By

pressing the “–” 12 button again, you can switch back to

the manual mode. It is also possible to access the manual

mode by pressing the “+” 13 button.

–“Trip distance”: Distance covered since the last reset

To switch between display functions, press button “i” 1 on

the on-board computer or button “i” 11 on the operating unit

repeatedly until the required function is displayed.

To reset “Trip distance”, “Trip time” and “Avg. speed”,

switch to any of the three functions and then press and hold

the “RESET” button 6 until the indication is set to zero. This

also resets the values of the other two functions.

To reset the “Max. speed”, switch to this function and then

press and hold the “RESET” button 6 until the indication is set

to zero.

To reset “Range”, switch to this function and then press the

“RESET” 6 button until the display is reset to the value of the

factory setting.

If the on-board computer is removed from the holder 4, all val-

ues of the features are saved and can still be displayed.

Displaying/Adapting Basic Settings

The basic settings can be displayed and changed regardless

of whether the on-board computer is inserted in the holder 4

or not. Some settings are visible and changeable only when

the operating computer is inserted. Some menu items may be

missing depending on the equipment of your eBike.

To access the basic settings menu, press and hold the

“RESET” button 6 and the “i” button 1 until “Configuration”

is displayed in text indication d.

To switch between the basic settings, press button “i” 1 on

the on-board computer repeatedly until the required basic

setting is displayed. If the on-board computer is inserted in

the holder 4, you can also press button “i” 11 on the operat-

ing unit.

To change the basic settings, press the On/Off button 5 next

to indication “–” to reduce or scroll down, or the lighting but-

ton 2 next to indication “+” to increase or scroll up.

If the on-board computer is inserted in the holder 4, it is also

possible to change using buttons “–” 12 and “+” 13 on the

operating unit.

To exit the function and save a changed setting, press the

“RESET” button 6 for 3 s.

The following basic settings are available:

–“– Clock +”: The current time can be set here. Pressing

and holding the setting buttons fast-forwards the setting

speed.

–“– Wheel circum. +”: You can change this value pre-set by

the manufacturer by ± 5 %. This menu item is displayed

only when the on-board computer is in the holder.

–“– English +”: You can change the language of the text in-

dications. You can choose between German, English,

French, Spanish, Italian, Portuguese, Swedish, Dutch and

Danish.

–“– Unit km/mi +”: The speed and distance can be dis-

played either in kilometres or miles.

–“– Time format +”: The time can be displayed either in the

12 hour or 24 hour format.

–“– Shift recom. on/off +”: You can switch the indication

of a shift recommendation on and off.

–“Power-on hours”: Indicates the total travel duration with

the eBike (not changeable).

–“Gear calibration” (only NuVinci H|Sync): Here you can

calibrate the continuously variable transmission. Confirm

the calibration by pressing the “Bike lights” button. Then

follow the instructions.

In the event of an error, it can also be necessary to perform

calibration when riding. In this case, you also confirm the

calibration by pressing the “Bike lights” button and then

follow the instructions on the display.

This menu item is displayed only when the on-board com-

puter is in the holder.

–“– Start gear +”: This is the starting gear which can be set

when using SRAM DD3 Pulse and Shimano Di2. The auto-

matic shift-back function is switched off in the “––” posi-

tion. This menu item is displayed only in connection with

SRAM DD3 Pulse and Shimano Di2. This menu item is dis-

played only when the on-board computer is in the holder.

–“Displ. vx.x.x.x”: This is the software version of the dis-

play.

–“DU vx.x.x.x”: This is the software version of the drive

unit. This menu item is displayed only when the on-board

computer is in the holder.

–“DU # xxxxxxxxx”: This is the serial number of the drive

unit. This menu item is displayed only when the on-board

computer is in the holder.

–“ Service MM/YYYY”: This menu item is displayed

when the bike manufacturer has set a fixed service ap-

pointment.

Range Odometer Gear: Auto

(1 s)

Gear

(1 s)

OBJ_BUCH-2074-005.book Page 6 Friday, May 29, 2015 7:41 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PowerPack 500 - Intuvia in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 23,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PowerPack 500 - Intuvia Manual

Product: