544019
14
Zoom out
Zoom in
Previous page
1/130
Next page
14 | English
1 609 929 W68 | (21.6.11) Bosch Power Tools
f Use the saw station only for cutting the materials listed
under Intended Use. Marble or granite as well as tiles with
a rough surface structure and natural stone tiles cannot be
cut.
Product Description and Specifica-
tions
Intended Use
PLS 300: Together with the power tool, the sawing station is
intended for sawing straight lengthway and crossway cuts in
boards and profiles of hardwood and softwood, as well as alu-
minium and plastic.
Horizontal mitre angles from a maximum of –45° to +45° as
well as bevel angles from a maximum of 0° to 45° can be set.
The sawing station is intended for operation exclusively with
jigsaws from the Bosch PST DIY program.
f Only use the saw blades recommended by Bosch (see
page 129). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
PLS 300 Set, PTC 1: Together with the tile cutter, the sawing
station is intended for cutting ceramic and nonvitreous tiles to
a maximum thickness of 10 mm.
Horizontal mitre angles from a maximum of – 45° to +45° can
be set.
Product Features
The numbering of the product features refers to the illustra-
tion of the sawing station on the graphics pages.
PLS 300
1 Base unit
2 Scale for mitre angle (horizontal)
3 Locking knob for height adjustment
4 Guide rail with sawing slot
5 Side stops of the guide rail
6 Support extension
7 Additional support
8 Bridge
9 End stop for bevel cuts
10 Locking lever of the guide rail
11 Alignment mark
12 Locking knob for various mitre angles
13 Mitre angle indicator
PTC 1*
14 Tile cutter
15 Stop with scale
16 Break-off cones
* only in combination with PLS 300
Technical Data
f Only use the saw blades recommended by Bosch (see
page 129). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
Sawing station PLS 300 PLS 300 Set
(PLS 300 + PTC 1)
Article number 3 603 M04 0.. 3 603 M04 1..
Sawing
Max. cutting length for crossway cuts (90°)
Max. cutting height
–Mitre/Bevel Angle
Horizontal
Vertical
mm
mm
°
°
315
25
± 45
± 45
315
25
± 45
± 45
Cutting tiles
Max. cutting length for crossway cuts (90°)
Max. cutting height
–Mitre/Bevel Angle
Horizontal
mm
mm
°
340
10
± 45
Weight according to EPTA-Procedure 01/2003
kg 3.4 3.4 + 0.2
Dimension of suitable saw blades
Max. overall length
mm 100
Max. toothed length
mm 76
OBJ_BUCH-1219-002.book Page 14 Tuesday, June 21, 2011 2:15 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PLS 300 Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLS 300 Set in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info