544019
13
Zoom out
Zoom in
Previous page
1/130
Next page
English | 13
Bosch Power Tools 1 609 929 W68 | (21.6.11)
Wartung und Service
Wartung und Reinigung
Sollte die Sägestation trotz sorgfältiger Herstellungs- und
Prüfverfahren kaputt gehen, ist die Reparatur von einer auto-
risierten Kundendienststelle für Bosch-Elektrowerkzeuge
ausführen zu lassen.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typenschild
der Sägestation an.
Reinigung
Entfernen Sie nach jedem Arbeitsgang Staub und Späne
durch Ausblasen mit Druckluft oder mit einem Pinsel.
Garantiebedingung
Durch Fehlanwendung kann es vorkommen, dass in die Füh-
rungsschiene 4 oder in die Brücke 8 gesägt wird. Daraus erge-
ben sich keine Garantieansprüche, weil die Funktion der Sä-
gestation dadurch nicht beeinflusst wird.
Kundendienst und Kundenberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter:
www.bosch-pt.com
Das Bosch-Kundenberater-Team hilft Ihnen gerne bei Fragen
zu Kauf, Anwendung und Einstellung von Produkten und Zu-
behören.
www.bosch-do-it.de, das Internetportal für Heimwerker und
Gartenfreunde.
www.dha.de, das komplette Service-Angebot der Deutschen
Heimwerker Akademie.
Deutschland
Robert Bosch GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Tel. Kundendienst: +49 (1805) 70 74 10*
Fax: +49 (1805) 70 74 11*
(*Festnetzpreis 14 ct/min, höchstens 42 ct/min aus Mobil-
funknetzen)
E-Mail: Servicezentrum.Elektrowerkzeuge@de.bosch.com
Tel. Kundenberatung: +49 (1803) 33 57 99
(Festnetzpreis 9 ct/min, höchstens 42 ct/min aus Mobilfunk-
netzen)
Fax: +49 (711) 7 58 19 30
E-Mail: kundenberatung.ew@de.bosch.com
Österreich
Tel.: +43 (01) 7 97 22 20 10
Fax: +43 (01) 7 97 22 20 11
E-Mail: service.elektrowerkzeuge@at.bosch.com
Schweiz
Tel.: +41 (044) 8 47 15 11
Fax: +41 (044) 8 47 15 51
Luxemburg
Tel.: +32 (070) 22 55 65
Fax: +32 (070) 22 55 75
E-Mail: outillage.gereedschap@be.bosch.com
Entsorgung
Sägestation, Zubehör und Verpackungen sollen einer umwelt-
gerechten Wiederverwertung zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
General Safety Rules
Read all warning notes and instructions en-
closed with the sawing station and the pow-
er tool to be mounted. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Safety Warnings for Sawing Stations
f Pull the plug from the mains receptacle and/or remove
the battery from the power tool before making adjust-
ments on the tool or changing tool accessories. Unin-
tentional switching on of the power tool is the cause of
many accidents.
f Assemble the sawing station in the proper manner be-
fore mounting the power tool. Safe guiding of the power
tool is possible only when the sawing station is properly as-
sembled.
f Place the sawing station on a firm, level and horizontal
surface. If the sawing station can slip off or wobbles, the
power tool or the workpiece cannot be uniformly and se-
curely guided.
f Attach the power tool securely to the sawing station
before using it. Slipping off of the power tool on the saw-
ing station can lead to loss of control.
f Take care that the cable of the power tool does not
come between the base unit and the guide rail. When
the cable is damaged or cut through, there is danger of
electric shock.
f Remove the power tool before modifying the sawing
station or folding up the guide rails. The power tool can
fall down, become damaged or cause injuries.
f Do not use a defective sawing station. Only an intact
sawing station can guide the power tool securely.
f Ensure that long and heavy workpieces do not affect
the equilibrium of the sawing station. Long and/or heavy
workpieces must be supported at the free end.
f Wear protective gloves when cutting tiles. Sharp edges
develop on broken tiles and can cause injuries to the oper-
ator.
OBJ_BUCH-1219-002.book Page 13 Tuesday, June 21, 2011 2:15 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PLS 300 Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLS 300 Set in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info