504769
22
Zoom out
Zoom in
Previous page
1/128
Next page
22 | English
2 609 140 621 | (18.7.11) Bosch Power Tools
Continuous Measurement (Tracking) (see figure E)
For continuous measurements, the measuring tool can be moved relative to the
target, whereby the measuring value is updated approx. every 0.5 seconds. In
this manner, as an example, you can move a certain distance away from a wall,
while the actual distance can always be read.
For continuous measurements, push button 6. The indicator for continuous
measurement (tracking) appears in the display .
Press the measuring button 12 to initiate the measur-
ing procedure. Move the measuring tool until the re-
quired distance value is indicated at the bottom of the
display.
Pushing the measuring button 12 interrupts the con-
tinuous measurement. The current measured value is
indicated in the display. Repeated pushing of the measuring button 12 starts the
continuous measuring again.
Continuous measurement automatically switches off after 5 min. The last meas-
ured value remains indicated on the display. To cancel continuous measure-
ment, you can change the measuring function by pressing button 1, 3 or 5.
Deleting Measured Values
Briefly pressing button 7 deletes the last individual measuring value determined
in all measuring functions. Briefly pressing the button repeatedly deletes the in-
dividual measured values in reverse order.
Memory Functions
When switching off the measuring tool, the value in the memory is retained.
Storing/Adding Measured Values
Push the memory add button 2 in order to store the
current measured value – a length, area or volume
value, depending on the current measuring function.
As soon as a value has been stored, “M” is indicated
in the display and the “+” behind it briefly flashes.
If a value is already stored in the memory, the new value is added to the memory
contents, however, only when the measures of unit correspond.
As an example, when an area value is in the memory and the current measured
value is a volume value, the addition cannot take place. “Error” briefly flashes in
the display.
Subtracting Measured Values
Push the memory subtraction button 8 in order to subtract the current measured
value from the memory value. As soon as a value has been subtracted, “M” is in-
dicated in the display and the “–behind it briefly flashes.
If a value is already stored in the memory, the new measured value can be sub-
tracted only when the measures of unit correspond (see “Storing/Adding Meas-
ured Values”).
Displaying the Stored Value
Push the memory retrieve button 4 in order to display
the value stored in the memory. “M=” is indicated in
the display. When the memory contents “M=” is indi-
cated in the display, it can be doubled by pushing the
memory add button 2 or set to zero by pushing the
memory subtract button 8.
OBJ_DOKU-27449-001.fm Page 22 Monday, July 18, 2011 10:31 AM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PLR 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLR 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PLR 50

Bosch PLR 50 User Manual - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info