Manual Bosch PLR 50 (page 23 of 128) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

504769

Zoom out

Zoom in

1/128

English | 23

Bosch Power Tools 2 609 140 621 | (18.7.11)

Deleting the Memory

To delete the memory contents, first push the memory retrieve button 4, so that

“M=” is indicated in the display. Then briefly press button 7; “M” is no longer in-

dicated in the display.

Working Advice

General Information

The reception lens 20 and the laser beam outlet 19 must not be covered when

taking a measurement.

The measuring tool must not be moved while taking a measurement (with the ex-

ception of the continuous measurement function). Therefore, place the measur-

ing tool, as far as this is possible, against or on the measuring points.

Measurement takes place at the centre of the laser beam, even when target sur-

faces are sighted at an incline.

Influence Effects on the Measuring Range

The measuring range depends upon the light conditions and the reflection prop-

erties of the target surface. For improved visibility of the laser beam when work-

ing outdoors and when the sunlight is intense, use the laser viewing glasses 22

(accessory) and the laser target plate 24 (accessory), or shade off the target sur-

face.

Influence Effects on the Measuring Result

Due to physical effects, faulty measurements cannot be excluded when measur-

ing on different surfaces. Included here are:

– Transparent surfaces (e.g., glass, water),

– Reflecting surfaces (e.g., polished metal, glass),

– Porous surfaces (e.g. insulation materials),

– Structured surfaces (e.g., roughcast, natural stone).

If required, use the laser target plate 24 (accessory) on these surfaces.

Also, air layers with varying temperatures or indirectly received reflections can

affect the measured value.

Measuring with the Positioning Pin (see figures B and F)

The positioning pin 14 is suitable for measuring out of corners (diagonal within a

space) or from hard to reach areas, such as from roller-shutter rails.

Slide the latch 15 of the positioning pin sideward in order to swivel out the pin.

Set the corresponding reference level for measurements with the positioning pin

by pushing button 9.

The positioning pin 14 swivels back in again by pushing it toward the housing to

the stop. The pin automatically locks in place.

Aligning with the Spirit Level

The spirit level 16 allows for simple levelling of the measuring tool. This allows

for easier sighting of target surfaces, especially over longer distances.

In combination with the laser beam, the spirit level 16 is not suitable for levelling.

Sighting with the Alingment Aid (see figure G)

With the alignment aid 11, sighting over larger distances is a lot easier. For this,

look alongside the aligning aid on the top side of the measuring tool. The laser

beam runs parallel to this line of sight.

OBJ_DOKU-27449-001.fm Page 23 Monday, July 18, 2011 10:31 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PLR 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PLR 50

Bosch PLR 50 User Manual - Dutch - 190 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PLR 50 Manual

Product: