Manual Bosch pbh 2900 fre (page 26 of 158) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

388876

Zoom out

Zoom in

1/158

26 | English

1 609 929 T39 | (19.11.10) Bosch Power Tools

Dust Extraction with the Dust Extrac-

tion Attachment (Accessory)

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– As far as possible, use a dust extraction

system suitable for the material.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

f Prevent dust accumulation at the work-

place. Dusts can easily ignite.

Mounting the Dust Extraction Attachment

(see figure K)

For dust extraction, the dust extraction attach-

ment (accessory) is required. When drilling, the

dust extraction attachment retracts so that the

attachment head is always close to the surface

at the drill hole.

– Press the button for depth stop adjustment

15 and remove the depth stop 18. Press but-

ton 15 again and insert the dust extraction

attachment into the auxiliary handle 17 from

the front.

– Connect an extraction hose (diameter

19 mm, accessory) to the extraction sleeve

27 of the dust extraction attachment.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Adjusting the Drilling Depth on the Dust Ex-

traction Attachment (see figure L)

The required drilling depth X can also be adjust-

ed when the dust extraction attachment is

mounted.

– Insert the SDS-plus drilling tool to the stop

into the SDS-plus tool holder 3. Otherwise,

the movability of the SDS-plus drilling tool

can lead to incorrect adjustment of the drill-

ing depth.

– Loosen the wing bolt 31 on the dust extrac-

tion attachment.

– Without switching the power tool on, apply it

firmly to the drilling location. The SDS-plus

drilling tool must face against the surface.

– Position the the guide pipe 32 of the dust ex-

traction attachment in its holding fixture in

such a manner that the head of the dust ex-

traction attachment faces against the surface

to be drilled. Do not slide the guide pipe 32

further over the telescopic pipe 30 of the

dust extraction attachment than required, so

that as much as possible of the scale 30 on

the telescopic pipe remains visible.

– Retighten the wing bolt 31 again. Loosen the

clamping screw 28 on the depth stop of the

dust extraction attachment.

–Move the depth stop 29 on the telescopic

pipe 30 in such a manner that the

clearance

X shown in the figure corresponds

with the required drilling depth.

– Tighten the clamping screw 28 in this posi-

tion.

OBJ_BUCH-318-003.book Page 26 Friday, November 19, 2010 4:36 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch pbh 2900 fre in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch pbh 2900 fre Manual

Product: