Manual Bosch pbh 2900 fre (page 24 of 158) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

388876

Zoom out

Zoom in

1/158

24 | English

1 609 929 T39 | (19.11.10) Bosch Power Tools

Adjusting the Drilling Depth (see figure B)

The required drilling depth X can be set with the

depth stop 18.

– Press the button for the depth stop adjust-

ment 15 and insert the depth stop into the

auxiliary handle 17.

The knurled surface of the depth stop 18

must face downward.

– Insert the SDS-plus drilling tool to the stop

into the SDS-plus tool holder 3. Otherwise,

the movability of the SDS-plus drilling tool

can lead to incorrect adjustment of the drill-

ing depth.

– Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drill-

ing depth X.

Selecting Drill Chucks and Tools

For hammer drilling and chiselling, SDS-plus

tools are required that are inserted in the SDS-

plus drill chuck.

For drilling without impact in wood, metal, ce-

ramic and plastic as well as for screwdriving,

tools without SDS-plus are used (e.g., drills

with cylindrical shank). For these tools, a key-

less chuck or a key type drill chuck are required.

PBH 3000-2 FRE: The SDS-plus quick change

chuck 2 can easily be replaced against the quick

change keyless chuck 1 provided.

Replacing the Drill Chuck

(PBH 2800 RE/ PBH 2900 FRE/

PBH 3000 FRE Set)

To work with drilling tools without SDS-plus

(e. g., drill bits with cylindrical shank), the key

type drill chuck or the keyless chuck must be

mounted.

Mounting the Key Type Drill Chuck

(Accessory) (PBH 2800 RE) (see figure C)

– Screw the SDS-plus adapter shank 22 into a

key type drill chuck 21. Secure the key type

drill chuck 21 with the securing screw 20.

Please observe that the securing screw has

a left-hand thread.

Inserting the Key Type Drill Chuck or the Key-

less Chuck (see figure D)

– Clean the shank end of the adapter shank

and apply a light coat of grease.

– Insert the key type drill chuck 21 or the key-

less chuck 23 with the adapter shank into the

tool holder with a turning motion until it au-

tomatically locks.

– Check the locking effect by pulling the key

type drill chuck or the keyless chuck.

Removing the Key Type Drill Chuck or the Key-

less Chuck

– Push the locking sleeve 5 toward the rear

and pull out the key type drill chuck 21 or the

keyless chuck 23.

Removing/Inserting the Quick Change

Chuck (PBH 3000-2 FRE)

Removing the Quick Change Chuck

(see figure E)

– Grasp the lock ring of the quick change

chuck 6 and pull it firmly in the direction of

the arrow. The quick change chuck is re-

leased and can be removed toward the front.

– After removing, protect the replacement

chuck against contamination.

Inserting the Quick Change Chuck

(see figure F)

– Before inserting, clean the quick change

chuck and apply a light coat of grease to the

shank end.

– Grasp the SDS-plus quick change chuck 2 or

the quick change keyless chuck 1 completely

with your hand. Slide the quick change chuck

with a turning motion onto the drill chuck

mounting 24 until a distinct latching noise is

heard.

– The quick change chuck is automatically

locked. Check the locking effect by pulling

the quick change chuck.

OBJ_BUCH-318-003.book Page 24 Friday, November 19, 2010 4:36 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch pbh 2900 fre in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch pbh 2900 fre Manual

Product: