765833
26
Zoom out
Zoom in
Previous page
1/260
Next page
26
en Universal cutter
10. Insert the mains plug. Set the rotary
switch to the desired setting.
Add the food to be processed to the
filling shaft and push down with the
pusher, applying light pressure. Cut up
beforehand if necessary.
Caution!
Empty the bowl in good time:
after processing max. 500 g,
before the cubes reach the lower
edge of the dicer.
Emptying the bowl
After processing, set the rotary switch to
P. Disconnect the mains plug.
Rotate the lid anti-clockwise and
remove.
Fit the blade guard.
Take the dicer out of the bowl.
Rotate the bowl anti-clockwise and
remove. Empty the bowl.
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 26
Universal cutter
For cutting up small quantities
of meat, hard cheese, onions,
parsley, garlic, fruit and vegetables. It
is not permitted to cut up coffee beans,
peppercorns, sugar, poppy seeds and
horseradish.
W Risk of injury
Do not remove / attach the universal cutter
until the drive has stopped. Do not touch
the blades of the blade insert with bare
hands. Never reach into the jug of the
universal cutter! To remove chopped food,
use a suitable implement (e.g. spoon).
Caution!
The universal cutter will not operate until
the lid is screwed on tight.
X Fig. K
1. Attach the jug. Observe the
marking (.) when doing so. Rotate the
jug clockwise as far as possible.
2. Add ingredients.
3. Attach the lid and rotate clockwise. The
lid lug must be fully inserted in the slot
of the jug.
4. Insert the mains plug. Turn the rotary
switch to setting M and hold.
Note: The longer the appliance remains
switched on, the finer the ingredients will
be cut. With herbs the desired cutting
result may be achieved very quickly after
switching the appliance on. A brief “tap” on
setting M may be sufficient.
After processing, release the rotary
switch. Disconnect the mains plug.
After using the appliance
Rotate the universal cutter anti-
clockwise and remove.
Turn the universal cutter over, and the
chopped food will fall into the lid.
Hold the lid. Rotate the jug anti-
clockwise and remove.
Remove the rest of the chopped food
from the jug using a suitable implement
(e.g. spoon).
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 26
Sample recipe for the
universal cutter
Honey and hazel nut spread
10 g hazelnuts
100 g honey (room temperature)
Put the nuts in the universal cutter jug
and grind for 5 seconds on setting M.
Add honey and process for 10 seconds
on setting M.
Note the recomended processing quantities
and times. X Fig. O
Cleaning and maintenance
The appliance requires no maintenance.
Thorough cleaning will guarantee a long
service life.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MC812B816 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MC812B816 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 38,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info