765833
24
Zoom out
Zoom in
Previous page
1/260
Next page
24
en Blender
5. Place the juice centrifuge in the bowl.
6. Attach the lid of the juice centrifuge with
the pusher. Observe the marking (.)
when doing so.
7. Rotate the lid clockwise as far as
possible.
8. Insert the mains plug. Set the rotary
switch to the setting min.
Add fruit or vegetables to the filling
shaft and push down with the
pusher, applying light pressure. Cut
up beforehand if necessary. After
processing, briefly set the rotary switch
to the setting max and let the appliance
run until the pulp is fully squeezed out.
After processing, set the rotary switch to
P. Disconnect the mains plug.
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 26
Caution!
Empty the bowl in good time:
after processing max. 500 g,
before the juice reaches the grating
container.
Blender
For mixing liquid or semi-solid food,
for cutting / chopping raw fruit and
vegetables and for puréeing food.
Blender jug made of Tritan
Tritan is an unbreakable plastic with no
discernable taste or smell. Blender jugs
made of Tritan can be used to process ice
cubes and frozen food.
W Risk of injury
Never reach into the attached blender! Do
not remove / attach the blender until the
drive is at a standstill. Do not touch the
blades of the blade insert with bare hands.
W Risk of scalding!
When processing hot liquids, steam
escapes through the funnel in the lid. Add
a maximum of 0.4 litres of hot or frothing
liquid.
Caution!
Do not expose the blender jug to
temperatures above 80°C.
X Fig. I
1. Attach the blender. Observe the
marking (.) when doing so. Rotate the
blender clockwise as far as possible.
2. Add ingredients.
Processing quantities
Solid food For optimum
results 80 g
Liquids max. 1.5 l
Hot or frothing liquids max. 0.4 l
3. Attach the lid and rotate clockwise. The
lid lug must be fully inserted in the slot
of the blender handle.
Caution!
Do not operate the blender when empty.
The blender will not operate until the lid
is screwed on tight.
4. Insert the mains plug. Set the rotary
switch to the desired setting.
Adding more ingredients
5. To add more ingredients, set the rotary
switch to P. Remove the lid and add
ingredients, or
6. remove the funnel and gradually add
solid ingredients through the filling
opening.
7. Pour liquid ingredients through the
funnel.
After processing, set the rotary switch to
P. Disconnect the mains plug.
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 26
Tip: To preclean, pour a little water with
detergent into the attached blender. Switch
to setting M for several seconds. Discard
the water and rinse the blender with clean
water.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MC812B816 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MC812B816 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 38,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info