544296
18
Zoom out
Zoom in
Previous page
1/261
Next page
18 | English
2 609 141 177 | (31.3.14) Bosch Power Tools
Selecting the Setting of the Centre Indicator
With button 2, you can specify with which accuracy the position of the laser beam is
indicated as central on the reception area:
“Fine” adjustment, (indication g on the display),
“Medium” adjustment, (indication b on the display).
An audio signal sounds when the accuracy setting is changed.
Whenever switching on the measuring tool, the accuracy level “medium” is set.
Direction Indicators
The bottom a, centre f and top d indicators (both on the front and rear side of the
measuring tool) indicate the position of the rotating laser beam in the reception area
6. Additionally, the position can be indicated with an audio signal (see “Audio Signal
for Indication of the Laser Beam”, page 18).
Measuring tool too low: When the laser beam runs through the top half of the recep-
tion area 6, the bottom direction indicator a appears on the display.
When the audio signal is switched on, a slow-beat signal sounds.
Move the measuring tool upward in the direction of the arrow. When approaching the
centre mark 5, only the tip of the direction indicator a is indicated.
Measuring tool too high: When the laser beam runs through the bottom half of the
reception area 6, the top direction indicator d appears on the display.
When the audio signal is switched on, a fast-beat signal sounds.
Move the measuring tool downward in the direction of the arrow. When approaching
the centre mark 5, only the tip of the direction indicator d is indicated.
Measuring tool in centre position: When the laser beam runs through the reception
area 6 at the centre mark 5, the centre indicator f lights up. When the audio signal is
switched on, a continuous signal sounds.
Audio Signal for Indication of the Laser Beam
The position of the laser beam on the reception area 6 can be indicated via an audio
signal.
After the measuring tool has been switched on, the audio signal is always switched off.
When switching on the audio signal, you can choose between two volume levels.
To switch on the audio signal or change the volume level, push the acoustic signal
button 3 until the requested volume level is indicated. At medium volume level, the
audio signal indicator e in the display flashes; at high volume level, the indicator is
continuously lit. When the audio signal is set to off, the indicator goes out.
OBJ_BUCH-780-005.book Page 18 Monday, March 31, 2014 9:28 AM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch LR 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch LR 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info