544296
17
Zoom out
Zoom in
Previous page
1/261
Next page
English | 17
Bosch Power Tools 2 609 141 177 | (31.3.14)
Assembly
Inserting/Replacing the Battery
Alkali-manganese batteries are recommended for the measuring tool.
Press the latch 9 of the battery lid outward and open the battery lid 11.
When inserting the battery, pay attention to the correct polarity according to the rep-
resentation on the inside of the battery compartment.
When the battery low indicator c appears for the first time on the display 7, the meas-
uring tool can still be operated for approx. 3 h.
If the measuring tool is not used for a long period of time, the battery must be
removed. The battery can corrode or discharge itself over long periods.
Operation
Initial Operation
Protect the measuring tool against moisture and direct sun light.
Do not subject the measuring tool to extreme temperatures or variations in
temperature. As an example, do not leave it in vehicles for a long time. In case of
large variations in temperature, allow the measuring tool to adjust to the ambient
temperature before putting it into operation. In case of extreme temperatures or
variations in temperature, the accuracy of the measuring tool can be impaired.
Position the measuring tool at least 50 cm away from the rotational laser level. Po-
sition the measuring tool in such a manner that the laser beam can reach the recep-
tion area 6. Set the highest rotational speed on the rotational laser level.
Switching On and Off
A loud audio signal sounds when switching on the measuring tool. “At a dis-
tance of 0.2 m, the A-weighted sound pressure level of the audio signal can be up
to 95 dB(A).”
Do not hold the measuring tool close to your ear! The loud audio signal can
cause hearing defects.
To save energy, only switch the measuring tool on when you are using it.
–To switch on the measuring tool, press the On/Off button 1. Two audio signals
sound and all display indicators light up briefly.
–To switch off the measuring tool, press the On/Off button 1 again.
When no button is pressed on the measuring tool for approx. 10 minutes and when no la-
ser beam reaches the reception area
6
for 10 minutes, the measuring tool automatically
switches off in order to save the battery. The switching off is indicated by an audio signal.
OBJ_BUCH-780-005.book Page 17 Monday, March 31, 2014 9:28 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch LR 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch LR 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info