697413
27
Zoom out
Zoom in
Previous page
1/32
Next page
1 689 989 038 2008-08-15| Robert Bosch GmbH
Operation | KTS 340 | 27KTS 340 | 27 | 27 en
Software update5.6
The software update is either performed using the
"ESI[tronic] Startcenter" DVD or "Online".
The online help for the software update can be i
found in the ESI[tronic] Startcenter software under
"Help >> Help".
Software update using ESI[tronic] DVD5.6.1
Insert the "1. ESI[tronic] Startcenter" DVD in the
DVD drive (e. g. "D:\") of the PC/Laptop.
Open the "2. Execute" input box (select "Start >>
Execute..." in the task bar).
Enter3. D:\setup.exe and confirm with <OK>.
Set-up is started. ?
Follow the installation instructions on the screen. ?
Re-start the computer on completion of installation. 4.
Windows is shut down and the ESI[tronic] Start- ?
center re-started.
Use the USB connecting cable to connect the 5.
KTS 340 to a PC/Laptop.
Use the power supply unit provided to supply the 6.
KTS 340 with voltage.
The KTS 340 starts up. ?
The USB link and the power supply to the KTS 340 !
must not be interrupted during the software update.
ESI[tronic] Startcenter: Open "7. KTS 340 >> Device
information".
Select available update.8.
Select <9. Update>.
The system software is installed on the KTS 340. "
Online software update (as of ESI[tronic] 5.6.2
Startcenter version 2009/2)
Start the "1. ESI[tronic] Startcenter".
Open the "2. Settings >> Online updates" input box.
Enter customer number and password and select 3.
<Continue>.
If " i Login" is not possible, check proxy settings under
"Settings >> User settings".
Select available update and start software update.4.
Follow the installation instructions on the screen.5.
Re-start the computer on completion of installation. 6.
Windows is shut down and the ESI[tronic] Start- ?
center re-started.
Use the USB connecting cable to connect the 7.
KTS 340 to a PC/Laptop.
Use the power supply unit provided to supply the 8.
KTS 340 with voltage.
The KTS 340 starts up. ?
The USB link and the power supply to the KTS 340 !
must not be interrupted during the software update.
ESI[tronic] Startcenter: Open "9. KTS 340 >> Device
information".
Select available update.10.
Select <11. Update>.
The system software is installed on the KTS 340. "
Faults5.7
No communication with the control unit
The fault message "No system found" appears during
control unit diagnosis.
Possible causes Possible remedies
Wrong cable
connected.
Check whether the correct
cable has been used.
Wrong pin selected in
pin selection menu.
Consult "Diagnostic socket"
to see which pin has to be
used.
If problems of a different nature occur, please i
contact the ESI[tronic] service hotline directly.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch KTS 340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch KTS 340 in the language / languages: English, German as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch KTS 340

Bosch KTS 340 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info