697413
26
Zoom out
Zoom in
Previous page
1/32
Next page
1 689 989 038 2008-08-15| Robert Bosch GmbH
26 | KTS 340 | Operationen
Connection to the diagnostic interface in the vehicle is
made by way of:
The OBD diagnostic cable (Fig. 3, Item 2) or R
The OBD diagnostic cable and additionally the R
UNI connecting cable (Fig. 3, item 3; special acces-
sory) or
The OBD diagnostic cable and additionally a vehicle- R
specific adapter cable (special accessory) or
A vehicle-specific adapter cable R
(special accessory).
Switch-on 5.2
Switch on the KTS 340 with the button.
Following system start, the KTS 340 stops in the "
"Vehicle identification" start screen. The start screen
is always displayed after switch-on.
The KTS 340 is usually supplied with power by way of
the OBD diagnostic socket in the vehicle. If the posi-
tion of the OBD diagnostic socket in the vehicle is not
known, it is advisable to connect the KTS 340 by way of
the connecting cable for the cigarette lighter socket and
to locate the OBD diagnostic socket via the KTS 340
control unit diagnosis software.
On certain vehicles, voltage is only applied to the i
cigarette lighter socket after switching on the
ignition.
If a test step involves starting the engine, the battery i
voltage may drop to such an extent that supply is
no longer guaranteed by way of the vehicle. In such
cases it may be necessary to run the KTS 340 by way
of the power supply unit.
On some vehicles, the ignition must be switched on for i
power to be supplied via the OBD interface.
If the KTS 340 is connected via the USB connecting
cable to a PC/Laptop, the KTS 340 must be supplied by
way of the power supply unit provided.
Switch-off5.3
Press the button for approx. three seconds.
The KTS 340 is switched off. "
If it is only being run off the battery, the KTS 340 is
switched off if the battery voltage drops below 8 V or if
the device has not been used for ten minutes (factory
setting).
If the device is being supplied via an external power
source (e.g. OBD diagnostic cable, power supply unit
or connecting cable for cigarette lighter socket) and the
KTS 340 is not used for a lengthy period, the LCD touch
screen brightness is reduced.
LCD touch screen with stylus5.4
The LCD touch screen of the KTS 340 is operated using
the stylus. Touch the required application with the
stylus.
Program description5.5
The Online Help for the KTS 340 control unit diagnosis
software is opened in the header bar under "?".
Basic information on the KTS 340 and the ESI[tronic]
Startcenter can be found in the ESI[tronic] Startcenter
software under "ESI[tronic] trainer".
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch KTS 340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch KTS 340 in the language / languages: English, German as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch KTS 340

Bosch KTS 340 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info