697413
29
Zoom out
Zoom in
Previous page
1/32
Next page
1 689 989 038 2008-08-15| Robert Bosch GmbH
Technical data | KTS 340 | 29KTS 340 | 29 | 29 en
Technical data7.
General data7.1
Properties Value/range
Operating voltage 11 VDC — 34 VDC
Power input approx. 50 W
LCD 8.4"
800 x 600 pixel
Dimensions (L x W x H) 235 x 290 x 67 mm
Weight (without connecting cables) 2100 g
Operating temperature 5 °C – 40 °C
Relative humidity 90 % (at 25 °C)
Degree of protection IP 40
Interface protocols7.2
In accordance with ISO 15031 the following interfaces
and the corresponding protocols are supported for con-
trol unit diagnosis:
ISO/DIS 15765-4 (CAN) - baud rates: 250 kbit/s and R
500 kbit/s)
ISO 9141-2 Fast R
ISO/DIS 14230-4 (keyword protocol 2000) 5 baud R
ISO/DIS 14230-4 (keyword protocol 2000) Fast R
ISO/DIS 11519-4 (SAE J1850) PWM R
ISO/DIS 11519-4 (SAE J1850) VPW R
Power supply unit7.3
Properties Value/range
Input voltage 100 VAC — 240 VAC
Input frequency 50 Hz — 60 Hz
Output voltage 15 V
Operating temperature 0 °C — 40 °C
Multimeter specifications7.4
CH1 floating (blue input can be connected to live R
measurement points). Input resistance > 900 kohms.
CH2 non-floating (black ground input must be R
connected to vehicle ground). Input resistance
> 900 kohms.
DC measurement (CH1 and CH2)7.4.1
Properties Value/range
Measuring range 200 mV — 60 V
CH1 accuracy ±0.75 % of measured value,
additionally ±0.25 % of measuring range
CH2 accuracy ±2 % of measured value,
additionally ±0.5 % of measuring range
Resolution 100 µV — 100 mV
(depending on measuring range)
AC and rms value measurement 7.4.2
(CH1 and CH2)
*)
Properties Value/range
Frequency range AC 10 Hz — 400 Hz (-3 dB)
Measuring range 200 mV — 60 V
AC accuracy at 100 Hz
rms accuracy at = 100 H
±2 % of measured value,
additionally
±0.5 % of measuring range
Resolution 100 µV — 100 mV
(depending on measuring
range)
*)
The measuring ranges in measurement modes "U" and "I" are
specified as peak-to-peak values. Consequently, the digital
display box is "greyed out" as soon as the set measuring range is
briefly exceeded (overload).
Resistance measurement (CH1)7.4.3
Properties Value/range
Measuring range 100 — 1 M
Accuracy up to 200 K ±0.75 % of measured value,
additionally ±0.25 % of
measuring range
Accuracy up to 1 M ±2 % of measured value,
additionally ±0.25 % of
measuring range
Resolution 0.1 — 1000 (depending on
measuring range)
Input resistance > 9 M
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch KTS 340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch KTS 340 in the language / languages: English, German as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch KTS 340

Bosch KTS 340 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info