786297

Bosch GWX 17-125 S Manual

24
Zoom out
Zoom in
Previous page
1/379
Next page
24 | English
Speed preselection
You can preselect the required speed using the speed preselection thumbwheel (6), even during operation. The information in
the table below describes the recommended values.
Material Application Application tool Thumbwheel position
Metal Removing paint Sanding sheet 2–3
Metal Brushing, removing rust Cup brush, abrasive disc 3
Stainless steel Grinding Grinding disc/fibre disc 4–6
Metal Rough grinding Grinding disc 6
Metal Cutting Cutting disc 6
Stone Cutting Diamond cutting disc 6
uThe rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.
Speed preselection level [min-1]
1 2800
2 4500
3 6200
4 7900
5 9600
6 11,500
The values specified for speed levels are guide values.
Fitting
Fitting Protective Equipment
uPull the plug out of the socket before carrying out any
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-Sales Service and Applica-
tion Service" section for addresses.
Protective guard for grinding
Place the protective guard
(9) onto the holder on the
power tool until the coding
cams of the protective guard
are aligned with the holder.
When doing so, press and
hold the unlocking lever (1).
Press the protective guard
(9) onto the spindle collar un-
til the shoulder of the pro-
tective guard is sitting on the
flange of the power tool and
rotate the protective guard
until it audibly clicks into
place.
Adjust the position of the protective guard (9) to meet the
requirements of the operation. To do this, push the unlock-
ing lever (1) upward and rotate the protective guard (9) into
the required position.
uAlways position the protective guard(9) such that the
two cams on the unlocking lever(1) engage in the
corresponding openings on the protective guard(9).
uAdjust the protective guard (9) such that sparking in
the direction of the operator is prevented.
uThe protective guard (9) must only be adjustable
while the unlocking lever (1) is actuated. Otherwise,
the power tool must not be used any more under any
circumstances and must be sent to the after-sales ser-
vice.
Note: The coding cams on the protective guard (9) ensure
that only a protective guard that is suitable for the power
tool can be fitted.
Protective guard for cutting
uFor cutting, always use the protective guard for
cutting(11) or the protective guard for grinding (9)
together with the cover for cutting(13).
uProvide sufficient dust extraction when cutting stone.
The protective guard for cutting(11) is fitted in the same
way as the protective guard for grinding(9).
Metal cover for cutting
Fit the metal cover for cutting(13) on the protective guard
for grinding(9) (see figureA): Swivel the tool retainer back
(). Attach the cover(13) to the protective guard for
grinding(9) (). Press the tool retainer firmly into place on
the protective guard(9) ().
To remove the cover (see figureB), press the button on the
tool retainer () and swivel it back (). Remove the
cover(13) from the protective guard(9) ().
Plastic cover for cutting
Attach the plastic cover for cutting(13) to the protective
guard for grinding(9) (see figureC). The cover(13) audibly
and visually engages on the protective guard(9).
To remove the cover (see figureD), unlock the cover(13) on
the left- or right-hand side of the protective guard(9) ()
and remove the cover ().
Extraction guard for cutting with a guide block
The extraction guard for cutting with a cutting guide(25) is
fitted in the same way as the protective guard for grinding.
1 609 92A 6A1 | (14.02.2022) Bosch Power Tools
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWX 17-125 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 17-125 S in the language / languages: All languages as an attachment in your email.

The manual is 15.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info