786297

Bosch GWX 17-125 S Manual

26
Zoom out
Zoom in
Previous page
1/379
Next page
26 | English
Approved abrasive tools
You can use all the abrasive tools mentioned in these operat-
ing instructions.
The permissible speed [min-1] or the circumferential speed
[m/s] of the abrasive tools used must at least match the val-
ues given in the table.
It is therefore important to observe the permissible rota-
tional/circumferential speed on the label of the abrasive
tool.
Max. [mm] [mm] [°]
D b s d α [min-1] [m/s]
125 7.2 – X-LOCK –
–
11,500 80
125 4.2 – X-LOCK – 11,500 80
125 – – X-LOCK – 11,500 80
75 30 – X-LOCK – 11,500 80
125 – – X-LOCK – 11,500 80
125 – – X-LOCK – 11,500 80
82 – – X-LOCK – 11,500 80
α
s
125 6 10 X-LOCK >0 11,500 80
Rotating the machine head (seefigureE)
uPull the plug out of the socket before carrying out any
work on the power tool.
The machine head can be rotated in 90° increments. In this
way, the on/off switch can be brought into a more favourable
handling position for particular applications, e.g. for left-
handed tool users.
Completely unscrew the four screws(). Rotate the ma-
chine head carefully, without removing it from the hous-
ing, into the new position(). Screw in and retighten the
four screws().
Removing the Dust Filter (see figureF)
Slide off the dust filter(5) at the bottom of the power tool in
the direction of the arrow.
Do not hold the dust filter(5) by its sides and do not pull it
off.
Dust/Chip Extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
– Use a dust extraction system that is suitable for the ma-
terial wherever possible.
– Provide good ventilation at the workplace.
– It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Operation
uDo not load the power tool so heavily that it comes to a
stop.
uPull the plug out of the socket before carrying out any
work on the power tool.
uExercise caution when cutting slots in structural walls;
see the "Information on structural design" section.
uClamp the workpiece if it is not secure under its own
weight.
uIf the power tool has been subjected to a heavy load,
continue to run it at no-load for several minutes to
cool down the accessory.
uDo not use the power tool with a cut-off stand.
uDo not touch grinding and cutting discs until they have
cooled down. The discs can become very hot while work-
ing.
Working advice
Rough grinding
uAlways use the protective guard for grinding(9) when
rough grinding with bonded abrasives.
uNever use cutting discs for rough grinding.
uWhen rough grinding, the protective guard for
cutting(11) or the protective guard for grinding(9)
with a fitted cover for cutting(13) can impact the
workpiece and lead to a loss of control.
The best rough grinding results are achieved with a set angle
of 30° to 40°. Move the power tool back and forth with mod-
erate pressure. This will ensure that the workpiece does not
become too hot or discolour and that grooves are not
formed.
uThe protective guard for cutting(11) or the protective
guard for grinding(9) with a fitted cover for cutting(13)
must be used when using bonded discs which are ap-
proved for cutting and grinding.
1 609 92A 6A1 | (14.02.2022) Bosch Power Tools
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWX 17-125 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 17-125 S in the language / languages: All languages as an attachment in your email.

The manual is 15.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info