Manual Bosch GWS 24-230 JBX (page 23 of 135) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

79055

Zoom out

Zoom in

1/135

English - 9

Cut Off Grinder Stand

With the cut off grinder stand 27 (accessory),

workpieces can be cut at angles of 0 to 45° at the

same lengths.

The safety notes and operating instructions in the

respective instruction manual of the cut off

grinder stand are to be strictly observed. Use only

original Bosch cut off grinder stands.

Cutting Stone

■ The machine must be used only for dry cutting/

grinding. It is best to use a diamond cutting disc.

As a safety measure against jamming, use the

cutting guide 24 with the special dust extrac-

tion protection guard.

Operate the machine with dust extraction only. In

addition, wear a dust mask.

The vacuum cleaner

must be approved for

the extraction of ma-

sonry dust.

Bosch provides suit-

able vacuum clean-

ers.

Switch on the ma-

chine and place the

front part of the cut-

ting guide on the

workpiece.

Slide the machine with moderate feed, adapted

to the material to be worked (Figure).

For cutting especially hard material, e. g., con-

crete with high pebble content, the diamond cut-

ting disc can overheat and become damaged as

a result. This is clearly indicated by circular

sparking, rotating with the diamond cutting disc.

In this case, interrupt the cutting process and al-

low the diamond cutting disc to cool by running

freely at no-load speed for a short time.

Noticeable decreasing work progress and circu-

lar sparking are indications of a diamond cutting

disc that has become dull. Briefly cutting into

abrasive material (e. g., lime-sand brick) can re-

sharpen the disc.

The handle 26 can be turned with respect to the

motor housing by 90° either to the left or right.

This allows for the On/Off switch to be positioned

more conveniently for certain working situations,

e. g., for cutting work with the cutting guide/

grinder stand (accessories) and for left-handers.

Pull the handle unlocking button 25 firmly in the

direction of the arrow (

➊), turning the handle 26

at the same time to the desired position (

➋) until

it engages. The figure shows the handle 26

turned by 90°.

☞

The handle unlocking button 25 and the

On/Off switch 3 have a safety interlock.

The machine cannot be switched on if the

handle 26 is not engaged in one of the

three possible positions.

The handle 26 cannot be unlocked if the

On/Off switch 3 is locked.

Turning the Machine Handle

➊

➋

1 609 929 H82.book Seite 9 Dienstag, 3. Mai 2005 3:11 15

24 • 1 609 929 H82 • TMS • 28.04.05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-230 JBX in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 24-230 JBX Manual

Product: