Manual Bosch GWS 15-125 CITH (page 26 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79075

Zoom out

Zoom in

1/156

English | 271 609 929 L08 • 12.1.07

Switch on the

machine and place

the front part of the

cutting guide on the

workpiece. Slide the

machine with moder-

ate feed, adapted to

the material to be

worked.

For cutting expecially hard material, e. g., concrete

with high pebble content, the diamond cutting disc

can overheat and become damaged as a result. This

is clearly indicated by circular sparking, rotating with

the diamond cutting disc.

In this case, interrupt the cutting process and allow

the diamond cutting disc to cool by running the

machine for a short time at maximum speed with no

load.

Noticeable decreasing work progress and circular

sparking are indications of a diamond cutting disc that

has become dull. Briefly cutting into abrasive material

(e. g. lime-sand brick) can resharpen the disc again.

Information on Structures

Slots in structural walls are subject to the Standard

DIN 1053 Part 1, or country-specific regulations.

These regulations are to be observed under all cir-

cumstances. Before beginning work, consult the

responsible structural engineer, architect or the con-

struction supervisor.

Maintenance and Service

Maintenance and Cleaning

f Before any work on the machine itself, pull

the mains plug.

f For safe and proper working, always keep

the machine and ventilation slots clean.

f In extreme working conditions, conductive

dust can accumulate in the interior of the

machine when working with metal. The pro-

tective insulation of the machine can be

degraded. The use of a stationary extraction

system is recommended in such cases as

well as frequently blowing out the ventila-

tion slots and installing a residual current

device (RCD).

If the machine should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for

Bosch power tools.

In all correspondence and spare parts order, please

always include the 10-digit article number given on

the type plate of the machine.

WARNING! Important instructions for connect-

ing a new 3-pin plug to the 2-wire cable.

The wires in the cable are coloured according to the

following code:

Do not connect the blue or brown wire to the earth

terminal of the plug.

Important: If for any reason the moulded plug is

removed from the cable of this power tool, it must be

disposed of safely.

Service and Customer Assistance

Exploded views and information on spare parts can be

found under:

www.bosch-pt.com

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham-Uxbridge

Middlesex UB 9 5HJ

✆ Service: . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 82

✆ Advice line:. . . . . . . . . . . +44 (0)18 95 / 83 87 91

Fax: . . . . . . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 89

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

✆ Service: . . . . . . . . . . . . . . .+353 (0)1 / 4 66 67 00

Fax: . . . . . . . . . . . . . . . . . . . . .+353 (0)1 / 4 66 68 88

Australia and New Zealand

Robert Bosch Australia Pty. Ltd.

RBAU/SPT

1555 Centre Road

P.O. Box 66

3168 Clayton/Victoria

✆ . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 44

Fax: . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 45

www.bosch.com.au

OBJ_BUCH-165-003.book Page 27 Friday, January 12, 2007 9:16 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 15-125 CITH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GWS 15-125 CITH

Bosch GWS 15-125 CITH User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 156 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 15-125 CITH Manual

Product: