Manual Bosch GWS 15-125 CITH (page 25 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79075

Zoom out

Zoom in

1/156

26 | English 1 609 929 L08 • 12.1.07

Reduced starting current

The electronic reduced starting current limits the

power consumption when switching the tool on and

enables operation from a 13 ampere fuse.

Constant Electronic Control

Constant electronic control holds the speed constant

at no-load and under load, and ensures uniform work-

ing performance.

Speed preselection (GWS 15-125 CIEH/GWS 15-125 CITH)

The required speed can be preselected with the thumbwheel 3 (also while running).

The data in the following table are recommended values.

Operating Instructions

f Exercise caution when cutting slots in struc-

tural walls; see Section “

Information on

Structures

”.

f Clamp the workpiece if it does not remain

stationary due to its own weight.

f Do not strain the machine so heavily that it

comes to a standstill.

f Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

Rough Grinding

f Never use a cutting disc for roughing.

The best roughing results are achieved when setting

the machine at an angle of 30° to 40°. Move the

machine back and forth with moderate pressure. In

this manner, the workpiece will not become too hot,

does not discolour and no grooves are formed.

Flap Disc

With the flap disc (accessory), curved surfaces and

profiles can be worked.

Flap discs have a considerably higher service life,

lower noise levels and lower sanding temperatures

than conventional sanding sheets.

Cutting Metal

f For cutting metal, always work with the pro-

tection guard for cutting 13.

When cutting, work with moderate feed, adapted to

the material being cut. Do not exert pressure onto the

cutting disc, tilt or oscillate the machine.

Do not reduce the speed of running down cutting

discs by applying sideward pressure.

The machine must

always work in an up-

grinding motion. Oth-

erwise, the danger

exists of it being

pushed uncon-

trolled out of the cut.

When cutting profiles

and square bar, it is

best to start at the

smallest cross sec-

tion.

Cutting Stone

f For cutting stone, always work with the cut-

ting guide with dust extraction protection

guard 20.

f The machine may be used only for dry cut-

ting/grinding.

For cutting stone, it is best to use a diamond cutting

disc. As a safety measure against jamming, the cutting

guide with dust extraction protection guard 20 must

be used.

Operate the machine only with dust extraction and

additionally wear a dust protection mask.

The vacuum cleaner must be approved for the extrac-

tion of masonry dust. Bosch provides suitable vacuum

cleaners.

Material Application Tool Thumbwheel 3

Metal Removing paint Sanding disc 2 –3

Wood, metall Brushing, rust removal Cup brush, sanding disc 3

Metal, masonry Sanding Sanding disc 4 –6

Metal Rough grinding Sanding disc 6

Masonry, stone Cutting Cutting disc and cutting guide

(Cutting masonry/stone is permitted

only with use of the cutting guide) 6

OBJ_BUCH-165-003.book Page 26 Friday, January 12, 2007 9:16 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 15-125 CITH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GWS 15-125 CITH

Bosch GWS 15-125 CITH User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 156 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 15-125 CITH Manual

Product: