Manual Bosch GOP 40-30 Professional (page 21 of 304) (All languages)

640565

Zoom out

Zoom in

1/304

English | 21

Bosch Power Tools 1 609 92A 18M | (14.12.15)

Mounting/Replacing the Application Tool/Accessory

(GOP 30-28)

If required, remove an already mounted application tool/

accessory.

For removing the application tool/accessory, loosen the

screw 6 with the hex key 7 and remove the application

tool/accessory.

Mount the requested application tool/accessory (e.g. plunge

cut saw blade 5) in such a manner on the tool holder 4 that the

offset faces downward (see illustration on the graphics page;

marking on the application tool/accessory is readable from

above).

Turn the application tool/accessory to a position favourable

for the respective job, and allow it to engage into the cams of

the tool holder 4. 12 different positions are possible, each

offset by 30°.

Fasten the application tool/accessory with bolt 6. Tighten the

bolt with hex key 7 until the spring washer of the bolt faces

flush against the application tool/accessory.

 Check the tight seating of the application tool/accessory.

Incorrect or not securely fastened application tools/accesso-

ries can come loose during operation and pose a hazard.

Mounting/Replacing the Application Tool/Accessory

(GOP 40-30/GOP 55-36)

If required, remove an already mounted application tool/ac-

cessory.

To do so, open the SDS lever 12 all the way. The application

tool/accessory will be ejected.

Mount the requested application tool/accessory (e.g. plunge

cut saw blade 5) in such a manner on the tool holder 4 that the

offset faces downward (see illustration on the graphics page;

marking on the application tool/accessory is readable from

above).

HM-Riff sanding

finger

Wood,

Paint

Sanding wood or paint in hard to reach areas without

sanding paper;

example: sanding off paint between shutter louvres,

sanding wooden floors in corners

HM-Riff plunge cut

saw blade

Fibreglass,

Mortar,

Wood

Plunge cuts in severely abrasive materials;

example: routing thin mosaic tiles

HCS universal joint

cutter

Expansion joints,

Putty,

Insulation materials (rock

wool)

Cutting and separating soft materials;

example: cutting silicone expansion joints or putty

BIM plunge cut saw

blade, wood and

metal

Softwood,

Hardwood,

Veneered panels,

Plastic-laminated panels,

Non-hardened nails and

screws

Fast, deep plunge cuts in wood and metal;

example: quick cutting of wood containing nails, deep

plunge cuts in laminated panels and precise shortening of

door frames

TC plunge cut saw

blade, metal

Stainless steel (Inox),

Screws and nails,

Epoxy resin,

Glass fibre reinforced

plastics,

Fibreglass,

Plasterboard,

Porous concrete

Fast, deep plunge cuts in severely abrasive materials or

metal;

example: fast cutting of kitchen front covers, easy cutting

through hardened screws, nails and stainless steel

BIM plunge cut saw

blade, wood and

metal

Wood,

Abrasive wooden

materials,

Plastics,

Hardened nails and

screws,

Non-ferrous metal pipes

Fast, deep plunge cuts in wood, abrasive wooden materials

and plastics;

example: fast cutting of non-ferrous metal pipes and pro-

files with smaller dimensions, easy cutting of non-hardened

nails, screws and steel profiles with smaller dimensions

HCS plunge cut saw

blade, wood

Softwood,

Dowels,

Tenons,

Furniture components

Fast, deep separating and plunge cuts; also for sawing

close to edges in corners and hard to reach areas;

example: deep plunge cut in softwood for installing a

ventilation grid

Accessory Material Application

OBJ_BUCH-2566-001.book Page 21 Monday, December 14, 2015 4:27 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GOP 40-30 Professional in the language / languages: All languages as an attachment in your email.

The manual is 20,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GOP 40-30 Professional Manual

Product: