640565

Bosch GOP 40-30 Professional Manual

19
Zoom out
Zoom in
Previous page
1/304
Next page
English | 19
Bosch Power Tools 1 609 92A 18M | (14.12.15)
Selecting the Application Tool/Accessory
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Accessory GOP 30-28
GOP 40-30
GOP 55-36
Accessory Material Application
BIM segment saw
blade
Wooden materials,
Plastic,
Non-ferrous metals
Separating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Base plate for sand-
ing, series Delta
93 mm
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
Fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnishes, polishing felt for pre-
polishing
Profile sander
Wood,
Pipes/Profile,
Paint,
Varnishes,
Filler,
Metal
Convenient, efficient sanding of profiles up to a diameter of
55 mm;
Red sanding sheets for sanding wood, pipes/profiles,
varnishes, fillers and metal
BIM plunge cut saw
blade, wood and
metal
Softwood,
Soft plastics,
Plasterboard,
Thin-walled aluminium
and non-ferrous metal
profiles,
Thin sheet metals,
Non-hardened nails and
screws
Smaller separating and plunge cuts;
example: cutting an opening for sockets, flush cutting a
copper pipe, plunge cuts in plasterboard
Filigree adjustment work in wood;
example: sawing openings for locks and fittings
HCS plunge cut saw
blade, wood
Wooden materials,
Soft plastics
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Bi-metal plunge cut
saw blade, hard-
wood
Hardwood,
Laminated panels
Plunge cuts in laminated panels or hardwood;
example: installing skylights
OBJ_BUCH-2566-001.book Page 19 Monday, December 14, 2015 4:27 PM
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GOP 40-30 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GOP 40-30 Professional in the language / languages: All languages as an attachment in your email.

The manual is 20,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info