Manual Bosch GLM 100 C Professional (page 28 of 367) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

592055

Zoom out

Zoom in

1/367

28 | English

2 609 141 026 | (1.7.13) Bosch Power Tools

Activating the Bluetooth® Interface for Data Transmission

to a Mobile Terminal/Device

To activate the Bluetooth® interface, press the measuring

tool’s Bluetooth® button 13. Make sure that the Bluetooth® in-

terface on your mobile terminal/device is activated.

Special Bosch applications (apps) are available to extend the

functional range of the mobile terminal/device and for simpli-

fication of the data processing. Depending on terminal/de-

vice, these can be downloaded at the respective app stores:

After starting the Bosch application, the connection between

the mobile terminal/device and the measuring tool is estab-

lished. When several active measuring tools are found, select

the appropriate measuring tool. When only one active meas-

uring tool is found, the connection is automatically estab-

lished.

Note: When establishing the connection between the meas-

uring tool and the mobile terminal/device (e.g., smartphone,

tablet) the first time (pairing), the measuring tool's PIN code

may be requested. In this case, enter “0000”.

The connection status and the active connection are indicat-

ed on the display 1 (l).

When a connection cannot be established within 5 minutes

after pressing the Bluetooth® button 13, the Bluetooth® fea-

ture automatically switches off to save the batteries/re-

chargeable batteries.

When operating the measuring tool in the measuring rail 27,

data transmission is not possible.

Deactivating the Bluetooth® Interface

To activate the Bluetooth® interface, press the Bluetooth®

button 13 or switch the measuring tool off.

When the Bluetooth® interface is deactivated or when the

Bluetooth® connection is interrupted (e.g., because of too

large distance or obstructions between the measuring tool

and the mobile terminal/device as well as electromagnetic

disturbances), Bluetooth® (l) is no longer indicated on the

display.

Data Transmission via USB Interface

Connect the measuring tool to your computer or notebook

with the micro USB cable. After starting the software on your

computer or notebook, a connection is established to the

measuring tool.

To download the current software and for further information,

please refer to the Bosch website at

www.bosch-pt.de.

Note: As soon as the measuring tool is connected to a com-

puter or notebook via the micro USB cable, the lithium ion

battery is charged. The charge duration varies depending on

the charging current.

To recharge the measuring tool as quickly as possible, use the

provided charger, see “Battery Charging”.

Working Advice

 The measuring tool is equipped with a radio interface.

Local operating restrictions, e.g. in airplanes or hospi-

tals, are to be observed.

General Information

The reception lens 17 and the laser beam outlet 18 must not

be covered when taking a measurement.

The measuring tool must not be moved while taking a meas-

urement (with the exception of the continuous measurement

and grade measurement functions). Therefore, place the

measuring tool, as far as this is possible, against or on a firm

stop or supporting surface.

Influence Effects on the Measuring Range

The measuring range depends upon the light conditions and

the reflection properties of the target surface. For improved

visibility of the laser beam when working outdoors and when

the sunlight is intense, use the laser viewing glasses 30 (ac-

cessory) and the laser target plate 31 (accessory), or shade

off the target surface.

Influence Effects on the Measuring Result

Due to physical effects, faulty measurements cannot be ex-

cluded when measuring on different surfaces. Included here

are:

– Transparent surfaces (e.g., glass, water),

– Reflecting surfaces (e.g., polished metal, glass),

– Porous surfaces (e.g. insulation materials),

– Structured surfaces (e.g., roughcast, natural stone).

If required, use the laser target plate 31 (accessory) on these

surfaces.

Furthermore, faulty measurements are also possible when

sighting inclined target surfaces.

Also, air layers with varying temperatures or indirectly re-

ceived reflections can affect the measured value.

Accuracy Check and Calibration of the Grade Measure-

ment (see figure H)

Regularly check the accuracy of the grade measurement. This

is done by carrying out a reversal measurement. For this,

place the measuring tool on a table and measure the grade.

Turn the measuring tool by 180 ° and measure the grade

again. The difference of the indicated reading may not exceed

by more than 0.3 ° (max.).

In case of greater deviation, the measuring tool must be recal-

ibrated. For this, press and hold the grade measurement but-

ton 3. Follow the directions on the display.

After severe temperature changes and impact, we recom-

mend an accuracy check and, if required, to recalibrate the

measuring tool. After a temperature change, the measuring

tool must acclimate for a while before calibrating.

OBJ_BUCH-1956-002.book Page 28 Monday, July 1, 2013 11:28 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GLM 100 C Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GLM 100 C Professional Manual

Product: