786250
20
Zoom out
Zoom in
Previous page
1/305
Next page
20 | English
Status indications
Battery charge indicator
(user interface)(14) Meaning/cause Solution
Green Battery charged
Yellow Battery almost empty Replace or charge battery soon
Red Battery empty Replace or charge battery
Overload protection indic-
ator (user interface)(18) Meaning/cause Solution
Yellow Critical temperature has been reached (mo-
tor, electronics, battery) Run the power tool at no load and allow it to
cool down
Red Power tool is overheated and will switch off Leave the power tool to cool down
Power tool status indicator
(user interface)(17) Meaning/cause Solution
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
Illuminated red Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
or charge the battery
Flashing red Kickback shutdown, restart protection or im-
pact shutdown has been triggered Turn the power tool off and on again
Flashing blue Power tool is connected to a mobile device or
settings are being transferred
Connectivity functions
In conjunction with the Bluetooth® Low Energy Module
GCY30-4, the following connectivity functions are available
for the power tool:
Registration and personalisation
Status check, output of warning messages
General information and settings
Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy ModuleGCY30-4.
Practical advice
uIn areas in which the Bluetooth® wireless technology
must not be used, the GCY30-4 Bluetooth® Low Energy
Module and the button cell must be removed.
uThe power tool with inserted Bluetooth® Low Energy
Module GCY30-4 is equipped with a radio interface.
Local operating restrictions, e.g. in aircraft or hospit-
als, must be observed.
Move the grinding tool evenly back and forth with light pres-
sure to achieve an optimum work result. Pressure that is too
strong reduces the performance capability of the power tool
and causes the grinding tool to wear more quickly.
uProtect the grinding tools against impact.
Recommendations for optimal handling of the battery
Protect the battery against moisture and water.
Only store the battery only within a temperature range of -20
to 50 °C. Do not leave the battery in your car in the summer,
for example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Maintenance and Service
Maintenance and Cleaning
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
1 609 92A 6DP | (15.06.2021) Bosch Power Tools
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GGS 18V-10 SLC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GGS 18V-10 SLC in the language / languages: All languages as an attachment in your email.

The manual is 4.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info