786250

Bosch GGS 18V-10 SLC Manual

19
Zoom out
Zoom in
Previous page
1/305
Next page
English | 19
the specifications provided by the manufacturer of the
application tool. It must not be less than the maximum
speed of the power tool.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one’s
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Operation
Starting operation
Switching On and Off
To start the power tool, slide the on/off switch(5) forwards.
To lock the on/off switch(5) in position, push the on/off
switch(5) forwards and down until it clicks into place.
To switch off the power tool, release the on/off switch(5);
or, if the switch is locked, briefly push the on/off switch(5)
backwards and down and then release it.
Inserting the Battery
uDo not use force to insert the battery. The battery is de-
signed in such a way that it can only be inserted into the
power tool when it is in the right position.
Push the charged battery into the battery holder until it
clicks into place.
Kickback Stop
If there is a sudden kickback in the power tool,
e.g. jamming when carving, the power supply
to the motor will be interrupted electronically.
To restart the tool, set the on/off switch (5) to
the off position and then switch the power tool on again.
Restart Protection
The restart protection feature prevents the power tool from
uncontrolled starting after the power supply to it has been
interrupted.
To restart the tool, set the on/off switch (5) to the off posi-
tion and then switch the power tool on again.
Note: Rapidly switching the power tool off and on again may
trigger the restart protection, meaning the power tool may
not start up even if the on/off switch (5) is pressed. Set the
on/off switch (5) to the off position and then switch the
power tool on again.
Impact shutdown
The integrated impact shutdown switches the power tool off
as soon as it hits the floor. The status indicator(17) then
flashes red. To restart the tool, set the on/off switch(5) to
the "off" position and then switch the power tool on again.
User interface (seefigureB)
The user interface(13) is used to preselect the speed and to
indicate the status of the power tool.
Speed preselection
You can use the button for speed preselection(16) to preselect the required speed, even during operation. The information in
the table below describes the recommended values.
Material Application Tools Speed preselection
level [min-1]
Metal Milling Router bits 3 10,500
Metal Grinding Grinding stones 3 10,500
Metal Removing rust Brush 1 4500
Metal Grinding Abrasive sleeves 3 10,500
Metal Grinding Fan grinders, corundum A 2 7500
Stainless steel Grinding Fan grinders, stainless
steel 2 7500
Metal Grinding Fleece tools 1 4500
Metal Grinding Fleece tools, abrasive
wheels 1 4500
The values specified for speed levels are guide values.
uThe rated speed of the accessory must be at least
equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed
can break and fly apart.
Bosch Power Tools 1 609 92A 6DP | (15.06.2021)
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GGS 18V-10 SLC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GGS 18V-10 SLC in the language / languages: All languages as an attachment in your email.

The manual is 4.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info