786514

Bosch GAM 270 MFL Manual

22
Zoom out
Zoom in
Previous page
1/331
Next page
22 | English
1. SPR: Storing the spring angle
SPR
SPR
The spring angle can be saved as follows:
– Open the fold-out leg and base leg until the required spring angle is
shown on the display.
– Measure the spring angle if it is unknown. For this, place the workpiece to
be measured between the fold-out leg and the base leg.
When measuring particularly narrow or small workpieces with the meas-
uring tool is not possible, use auxiliary equipment such as a bevel angle or
mitre rule, and then adjust the angle on the measuring tool.
Press the MTR2(16) button to store the measured spring angle for the com-
pound mitre. SPR and the current angle will appear on the display.
When the angle is greater than 90° yet less than 180° when pressing the
buttonMTR2(16), the slope angleSPR is automatically converted as fol-
lows:
SPR=180°–measured or set angle.
2. CNR: Storing the corner angle
CNR
To measure the corner angle, place the fold-out and base legs flat against the
walls or set a known corner angle on the measuring tool.
Press the MTR2(16) button again to store the measured corner angle for
the compound mitre. CNR and the current angle will appear on the display.
3. MTR: Calculating the mitre angle
MTR
Press the MTR2(16) button again. MTR and the calculated mitre angle for
the mitre saw are indicated on the display. The mitre angle is used to define
the rotation of the saw table (MTR).
4. BVL: Calculating the bevel angle
BVL
Press the MTR2(16) button again. BVL and the calculated bevel angle for
the mitre saw are indicated on the display.
The bevel angle is used to define the incline of the saw blade (BVL).
If necessary, the mitre and bevel angle can be retrieved again, but only if the
on/off button(14) has not been pressed to change the operating mode.
Press the buttonMTR2(16) to retrieve the angle. In the display, MTR and
the calculated mitre angle appear; upon pressing the buttonMTR2(16)
again, BVL and the bevel angle appear.
Press the buttonMTR1(15) for less than onesecond to switch back from
the "compound mitre" operating mode to the "standard measurement" oper-
ating mode.
1 609 92A 7M1 | (28.04.2022) Bosch Power Tools
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GAM 270 MFL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GAM 270 MFL in the language / languages: All languages as an attachment in your email.

The manual is 10.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info