1139
16
Zoom out
Zoom in
Previous page
1/85
Next page
English - 5
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Fault Finding
Symptom Possible Cause Remedy
Machine fails to operate Switch fails to operate
Securing knob 3 has not been fully
tightened
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Motor protector has activated
Power supply interrupted
On/Off switch 2 returns to position 0.
Follow Restart Protection procedure
(Starting and Stopping)
Do not push On/Off switch 2 while it is
being rotated
Tighten securing knob 3
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse/Restart
Follow Overload Protection proce-
dure (Starting and Stopping)
Follow Overload Protection proce-
dure (Starting and Stopping)
Allow machine to cool then follow
Overload Protection procedure.
(Starting and Stopping)
Machine functions
intermittently
Extension cable damaged
Machines internal wiring damaged
Motor protector has activated
On/Off switch 2 returns to position 0.
Inspect cable, replace if damaged
Contact Service Agent
Follow Overload Protection proce-
dure (Starting and Stopping)
Allow machine to cool then follow
Overload Protection procedure.
(Starting and Stopping)
Poor cutting performance Cutting blade blunt
Cutting blade dirty
Feed intake or discharge chute
blocked
Replace blade (see Blade Mainte-
nance)
Remove blade and clean (see Blade
Maintenance)
Clean machine (see Removing
Blockage) and empty collecting bag
Cutting blade not rotating Cutting blade obstructed
Blade nut/bolt loose
Clear obstruction (see Removing
blockage)
Tighten blade nut/bolt
Excessive vibration/
noise
Blade nut/bolt loose
Cutting blade damaged
Machine damaged internally
Tighten blade nut/bolt
Replace blade
Contact Service Agent
F 016 L70 340.book Seite 5 Dienstag, 25. Oktober 2005 9:36 09
16 F 016 L70 340 TMS 20.10.05
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AXT RAPID 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AXT RAPID 180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info