Manual Bosch AXT RAPID 180 (page 14 of 85) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

1139

Zoom out

Zoom in

1/85

English - 3

Products sold in GB only: Your mower is fitted with

an approved 13 A (BS 1363/A) electric plug and is

protected by a 13 A fuse (ASTA Approved to

BS 1362).

If the fitted plug is not suitable for your socket out-

lets, it should be cut off and an appropriate plug fit-

ted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

Remove the machine from the package.

Mount the wheels and the undercarriage.

Fit the Allen key 12 as shown.

The blade continues to rotate for a few

seconds after the machine is switched off.

Allow the motor/blade to stop rotating be-

fore switching “on” again.

Do not rapidly switch off and on.

Starting:

To start your Shredder, rotate the On/Off switch 2

from position “0” to position “II”. Allow machine to

start and release switch, which will return to posi-

tion “I” (the normal run position).

Important note: The machine will not start if the

On/Off switch 2 is pushed in slightly, whilst be-

ing rotated.

As a safety feature the machine will not start unless

the hopper securing knob 3 is fully tightened.

Stopping:

Rotate the On/Off switch 2 to position “0”.

Note: The blade will stop automatically before the

cover 11 can be removed.

Emergency Stop:

Press the On/Off switch 2.

Restart Protection

After a mains failure, or if the product cuts out due to

overloads, the machine cannot restart on its own

when the power returns or when protector resets.

To restart the machine:

Set the On/Off switch 2 to “0”.

Rotate the On/Off switch 2 to position “II”, al-

low the machine to start and release the

switch. It will now move to position “I” (the nor-

mal run position).

Important note: The machine will not start if the

On/Off switch 2 is pushed in slightly, whilst be-

ing rotated.

Overload Protection

Overloading (e. g. blocking up of the cutter) can lead

to a standstill of the machine after a few seconds. Af-

ter a short period, the machine can be switched on

again. If the machine blocks again turn it off.

Remove blockage (see “Removing blockage”), and

restart.

In order to collect the shredded material, fasten the

carrying straps of the collecting bag 7 (accessory) to

the two hooks 9.

Feed the material to be shredded through the feed

intake.

Longer material standing out from the ma-

chine could lash out when being cut!

Small pieces of shredded material may be

ejected from the feed intake. Ensure eye

protection, protective gloves and ear pro-

tection are used when using the machine.

Only insert as much material so that the feed in-

take 1 will not be blocked up.

Do not fill soft waste such as kitchen rubbish into the

shredder but compost directly.

Take care that the shredded material can fall freely

from the discharge chute 8 – danger of backing up!

The ventilation slots 5 must not be covered by the

collecting bag or the shredded material.

Avoid blocking the discharge chute 8 with shredded

material as this could result in kickback of material

through the feed intake opening.

Stop and remove plug from the power sup-

ply.

After fully unscrewing the securing knob 3, remove

cover 11 and clean the blade area. If debris is com-

pacted in the blade area, remove with a wooden or

plastic implement. Also clean the discharge chute 8

of any debris.

Assembly

Starting and Stopping

Shredding

Removing Blockage

F 016 L70 340.book Seite 3 Dienstag, 25. Oktober 2005 9:36 09

14 • F 016 L70 340 • TMS • 20.10.05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AXT RAPID 180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AXT RAPID 180 Manual

Product: