Manual Bosch AXT RAPID 180 (page 15 of 85) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

1139

Zoom out

Zoom in

1/85

English - 4

Branches become harder to shred depending on the

type, age and dryness of the wood.

For best results, shred fresh branches soon after

they have been cut.

The use of the prodder 13 will help with the feeding

of soft material.

Soft garden waste should be shredded in smaller

loads, particularly when wet.

Any blockages can be avoided by intermittently

shredding branches.

Stop and remove plug from the power sup-

ply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as loose,

dislodged or damaged blade, loose fixings, and

worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the machine should fail despite the rigorous man-

ufacturing and testing procedures, repair should be

carried out by an authorised customer service centre

for Bosch power tools.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Stop and remove plug from the power sup-

ply.

The blade has a double sided cutting edge.

When the cutting edges become blunt, the blade can

be turned over. When both sides are blunt replace

the blade.

Use the following procedure to remove, turnover or

replace the blade:

➊ Unscrew securing knob 3.

➋ Remove cover 11 as shown in fig. .

Wearing a pair of garden gloves (not supplied) turn

the blade 13 so that it aligns with the markings on

the reaction plate 17.

➌ Insert a screw driver into the hole 14 to lock the

drive.

➍ Use the allen key 12 to remove the blade bolt 16,

and the blade washer 15.

➎ Remove the blade 13 by lifting and sliding down-

wards as shown in fig.

Fit the blade, blade washer and the blade bolt.

Only use a Bosch approved blade bolt.

Tighten the bolt firmly (tightening torque 12 Nm).

Ensure that the allen key 12 and screw driver are re-

moved, also ensure that the cover 11 and securing

knob 3 are fitted before attempting to turn the ma-

chine on.

Blade.................................................F 016 800 164

Collection bag ...................................2 605 411 073

Gloves...............................................2 607 000 134

Protective goggles.............................2 607 990 041

Lubricant spray..................................1 609 200 399

Stop and remove plug from the power sup-

ply.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all debris, especially from the

ventilation slots 5.

Store the machine in a dry place. Do not place other

objects on top of the machine.

For additional security the switch can be padlocked

(padlock not supplied) as shown in fig. .

Advice on Shredding

Maintenance

Blade Maintenance

Accessories

After Shredding/Storage

F 016 L70 340.book Seite 4 Dienstag, 25. Oktober 2005 9:36 09

15 • F 016 L70 340 • TMS • 20.10.05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AXT RAPID 180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AXT RAPID 180 Manual

Product: